Skip to content
Image of Samsung TV
Template

Samsung TV

by LOXONEBrand: Samsung4 (2)5,789 downloads

Description

Steuern Sie Ihr Samsung TV-Gerät über virtuelle Ausgabebefehle.

Inputs and outputs · 21

NameTypeCommandUnit
Num 0VirtualOutKEY_0
Num 1VirtualOutKEY_1
Num 2VirtualOutKEY_2
Num 3VirtualOutKEY_3
Num 4VirtualOutKEY_4
Num 5VirtualOutKEY_5
Num 6VirtualOutKEY_6
Num 7VirtualOutKEY_7
Num 8VirtualOutKEY_8
Num 9VirtualOutKEY_9
Volume UpVirtualOutKEY_VOLUP
Volume DownVirtualOutKEY_VOLDOWN
Power ToggleVirtualOutKEY_POWER
Channel UpVirtualOutKEY_CHUP
Channel DownVirtualOutKEY_CHDOWN
SourceVirtualOutKEY_SOURCE
PlayVirtualOutKEY_PLAY
PauseVirtualOutKEY_PAUSE
StopVirtualOutKEY_STOP
Power OffVirtualOutKEY_POWEROFF
Power OnVirtualOutKEY_POWERON

FAQ

No questions have been answered yet.

Ratings and comments

  1. Rated 3 of 5

    Bis jetzt noch keine Funktion. NanoQLED aus 2021. Per IOBroker kann dieser gesteuert werden. Mit diesem Template trotz richtiger IP keine funktion.

    1. "Notice: This template is only for older TVs (< 2013). Newer TV's are using another communication protocol. Therefore you can not use this template."

  2. Rated 5 of 5

    works great

Questions and answers

  1. Can i Connect the audio of my Samsung Tv to my audio server loxone

    Open

    It is possible to connect the audio of my Samsung tv to the speakers connected to audio server loxone ? Thank you

    1 reply

    1. If you are using the line out from the TV the 3.5mm jack connection than you can connect this using a 3.5mm jack connection on the line in of the Audioserver.

      If you are using the optical out you have to have an optical to digital converter so optical in to analog out converter and than connect this to the line in of the Audioserver.

      Also keep in mind that the Line kabel may not be longer than 3m to keep out the interference.

Report this entry

Report abuse

You have to be logged in to report an entry. Log in