Panasonic Air Condition Remote Control
Description
In order to control your Panasonic Air Conditioner with Loxone, you need a Loxone IR Control Air. When turning the AC off using a traditional remote control, a compatible remote could also take care of turning off all other related home appliances – all with a single press of a button.
Inputs and outputs · 31
| Name | Type | Unit |
|---|---|---|
| Econavi | RCkey | |
| Off_On | RCkey | |
| Auto Comfort | RCkey | |
| Mode Auto | RCkey | |
| Mode Heat | RCkey | |
| Mode Cool | RCkey | |
| Mode Dry | RCkey | |
| 16 degrees | RCkey | |
| 17 degrees | RCkey | |
| 18 degrees | RCkey | |
| 19 degrees | RCkey | |
| 20 degrees | RCkey | |
| 21 degrees | RCkey | |
| 22 degrees | RCkey | |
| 23 degrees | RCkey | |
| 24 degrees | RCkey | |
| 25 degrees | RCkey | |
| 26 degrees | RCkey | |
| 27 degrees | RCkey | |
| 28 degrees | RCkey | |
| 29 degrees | RCkey | |
| 30 degrees | RCkey | |
| Nanoe-g | RCkey | |
| Mild Dry Cooling | RCkey | |
| Powerful Quit | RCkey | |
| Fan Speed 1 | RCkey | |
| Fan Speed 2 | RCkey | |
| Fan Speed 3 | RCkey | |
| Fan Speed 4 | RCkey | |
| Fan Speed 5 | RCkey | |
| Fan Speed Auto | RCkey |
FAQ
No questions have been answered yet.
Questions and answers
layout mobile app + compatibility
OpenHow does this plugin look like? And is it compatible with anay panaconic AC or only specific models?
1 reply
Hello, if the device has an infrared remote control, the buttons can be taught in and are therefore model-independent. A standard remote control can then be configured in the Loxone Config that is displayed in the app, or you can use the learned commands to link individual logics to them.
layout mobile app + compatibility
OpenHow does this plugin look like? And is it compatible with anay panaconic AC or only specific models?
1 reply
Hello, if the device has an infrared remote control, the buttons can be taught in and are therefore model-independent. A standard remote control can then be configured in the Loxone Config that is displayed in the app, or you can use the learned commands to link individual logics to them.
Loxone Config Example
OpenHi there,
Do you have an example how to integrate this in i.e. the Intelligent Room Controller?
Looking forward hearing from you.
Kind regards,
Nick
1 reply
example config is added in the additional downloads.
- Open
Hallo,
habe das Template geladen, jedoch komm ich nicht zum "Fahren"... hast du vielleicht ein Beispiel, wie du es im Programm abgebildet hast. (Bausteine etc.)
Danke dir!
LG Ralph
1 reply
Hello,
Config is added in the additional downloads.
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in