Skip to content
Library
Image of my-PV AC•THOR / AC•THOR 9s
Template

my-PV AC•THOR / AC•THOR 9s

by my-PV GmbHBrand: my-PVNo rating yet2,442 downloads

Download · v1.0.3Add to favourites

Updated Jun 13, 2025

Download · v1.0.3

Description

Steuern Sie Ihren PV Power Manager von my-PV über Modbus TCP

Inputs and outputs · 6

NameTypeUnit
Read PowerModbuskW
Read Temp 1Modbus°C
Set PowerModbuskW
Set WW1 Temp maxModbus°C
Set Operation modeModbus<v>
Set Power TimeoutModbuss

FAQ

No questions have been answered yet.

Ratings and comments

No ratings or comments yet.

Questions and answers

  1. Heating Rod Control no Modbus TCP commands accepted.

    Open

    Immanuel Rommel

    Hi,

    i have the problem that the program itself runs in the simulation and in the Liveview, but the heating rod control does not accept the TCP commands. Maybe someone has a hot tip for me.

    Thanks in advance :)

    Immanuel Rommel

    1 reply

    1. Maximilian Stoll

      Hello, We have a joint appointment with myPV soon and want to have the templates revised by July. This will also describe the path from Modbus activation to the app in the Loxone Config.

  2. Heating Rod Control no Modbus TCP commands accepted.

    Open

    Alexander Süß

    Hallo Maximilian,

    gibt es hierzu schon Neuigkeiten... Du schreibst ja, im Juli... ;-)

    Vielen Dank!

    Gruß Alex

    No replies

  3. Modbus ID ?

    Open

    Immanuel Rommel

    Hello Loxone Team,

    I have also tried to contact My PV. Unfortunately, I haven't received an answer yet. For me, the question would be where to find the Modbus address of the heating rod.

    The program runs, only the command transmission is missing.

    Thanks in advance :)

    Immanuel Rommel

    No replies

  4. Vorlage AC Thor My PV

    Open

    Maik Perner

    Die Vorlage lässt sich nicht runter laden.

    1 reply

    1. Markus Seitz

      Wird die Vorlage bearbeitet, aktualisiert? Würde das Template auch gerne verwenden, es lässt sich aber nicht herrunterladen

  5. Wiederholungsintervall/ Taktender myPV bei IBN

    Open

    Maximilian Stoll

    Hi, Ich hab meine IBN nach dieser Vorlage hier gemacht sowie der Vorlage der Loxoperten. (Youtubevideo).

    Mithilfe dieses tollen Templates habe ich es easy geschafft, dem Heizstab die korrekte Betriebsart (1), Time Out Intervall (60 Sek) sowie Maximaltemperatur (in meinem Fall 75 Grad weil ich einen Puffer mit Friwa habe) zu schreiben.

    Mithilfe des Loxoperten Videos habe ich die Einstellungen am ACThor Bedienmodul vornehmen können. Das fehlt dem Template hier noch, die Interaktion mit dem Bedienmodul zur z.B. statischen IP Konfiguration.

    Nachdem ich den Heizstab dann laufen lassen habe, ist dieser alle 20 Sekunden An und Aus gegangen. Nach Fehlersuche habe ich festgestellt, dass das Wiederholungsintervall im Loxone Aktor das Problem war.

    Nachdem ich dieses auf 8 Sekunden gesenkt habe, hat alles sauber funktioniert.

    Bitte um Anpassung.

    Danke, Gruß Max

    Hi, I made my commisioning today, according to this template here and the template of the Loxoperten. (Youtube video).

    With the help of this great template, I easily managed to write the correct operating mode (1), time out interval (60 sec) and maximum temperature (in my case 75 degrees because I have a buffer with Fresh water mixing system) to the heating element.

    I was able to make the settings on the ACThor control module with the help of the Loxoperten video. This is what the template is still missing here, the interaction with the control module for e.g. static IP configuration.

    After I let the heating element run, the ACThor went on and off every 20 seconds. After troubleshooting, I found that the repetition interval in the Loxone actuator was the problem.

    After I reduced this to 8 seconds, everything worked properly.

    Please adjust it.

    Thank you, Greetings Max

    No replies

Report this entry

Report abuse

You have to be logged in to report an entry. Log in