MB-OTG 1-Channel Modbus-to-OpenTherm Gateway
Description
Il gateway ModBus – OpenTherm a 1 canale può essere installato nel quadro elettrico oppure all’interno dello chassis del generatore con cui comunica e l’alimentazione è a 12 Vdc. Il sistema di supervisione a cui il gateway viene collegato deve avere protocollo Modbus RTU (RS-485) con parametri di comunicazione impostabili (baud rate 9600 o 19200, parità even o nessuna).
L’indirizzo slave configurabile va da 16 fino a 23.
Il gateway è predisposto con 1 canale per la comunicazione mediante protocollo OpenTherm con un solo generatore di calore. Tutti i collegamenti sono realizzati mediante morsetti estraibili; inoltre la connessione è optoisolata verso il generatore.
Inputs and outputs · 27
| Name | Type | Unit |
|---|---|---|
| Slave Configuration | Modbus | <v.1> |
| OEM Fault code | Modbus | <v.1> |
| RBP Flags | Modbus | <v.1> |
| Boiler maximum capacity (kW) | Modbus | <v.1> |
| Relative modulation level | Modbus | <v.1> |
| Heating circuit H2O pressure (bar) | Modbus | <v.1> |
| Water Outlet Temperature | Modbus | °C |
| DHW Temperature | Modbus | °C |
| Water Inlet Temperature | Modbus | °C |
| Boiler Working time | Modbus | <v.1> |
| Heating set point limit | Modbus | °C |
| DHW set point limit | Modbus | <v.1> |
| Exhaust fumes Temperature | Modbus | <v.1> |
| Water Pump working time | Modbus | <v.1> |
| Opentherm communication Status | Modbus | |
| Heating Set point | Modbus | <v.1> |
| DHW Set point | Modbus | <v.1> |
| Modulation Power limit | Modbus | <v.1> |
| Alarm present | Modbus | |
| Heat mode ON | Modbus | |
| DHW mode ON | Modbus | |
| Flame ON | Modbus | |
| Heating Set Point | Modbus | °C |
| DHW Set Point | Modbus | °C |
| Modulation Power Limit | Modbus | % |
| Heating Enable | Modbus | |
| DHW Enable | Modbus |
FAQ
No questions have been answered yet.
Questions and answers
Where to buy
OpenDo you know where I can buy the gateway? I only see an italian site from Marcomweb. Is this the only supplier?
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in