Template
Idegis Domotic
Description
Control and read the data of your salt electrolysis system via Modbus.
Inputs and outputs · 32
| Name | Type | Unit |
|---|---|---|
| Status | Modbus | <v.1> |
| Alarms | Modbus | <v.1> |
| Chlorine_production | Modbus | g/h |
| Pct_production | Modbus | <v.1> |
| Alarm | Modbus | |
| Electrolysis Polarity | Modbus | |
| Electrolysis ORP Stop | Modbus | |
| Cover_Input | Modbus | |
| Setpoint_Actual | Modbus | <v.1> |
| Salt_test_result | Modbus | <v.1> |
| Ph_measure | Modbus | <v.1> |
| Orp_measure | Modbus | mV |
| Dsg_time_limit_ph | Modbus | <v.1> |
| Setpoint_cover | Modbus | <v.1> |
| Setpoint_pH | Modbus | <v.1> |
| Setpoint_normal | Modbus | <v.1> |
| pH_Output | Modbus | |
| Flow_Alarm | Modbus | |
| Low_Salt | Modbus | |
| High_Salt | Modbus | |
| Setpoint_orp | Modbus | mV |
| Check Cell | Modbus | |
| Low pH | Modbus | |
| High pH | Modbus | |
| Low_mV | Modbus | |
| High_mV | Modbus | |
| Pump_stop_ph | Modbus | |
| Setpoint_normal | Modbus | <v.1> |
| Setpoint_cover | Modbus | <v.1> |
| Setpoint_pH | Modbus | <v.1> |
| Dsg_time_limit_ph | Modbus | <v.1> |
| Setpoint_orp | Modbus | <v.1> |
FAQ
No questions have been answered yet.
Questions and answers
Idegis-Domotic und Astralpool Smart Next 12 pH
OpenCan the "Idegis Domotic .LxAddon" template also be used with my "Astralpool Smart Next 12 pH" salt electrolysis system? If so, what is the factory-default Modbus address for the unit?
kind regards Erich
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in