Template

Wolf CWL Excellent

Name: Wolf CWL Excellent
Author: Marc Winkelmann

by Marc WinkelmannNo rating yet413 downloads

Content languageEnglish

Updated Nov 15, 2021

Description

Overview Control your WOLF CWL Excellent ventilation via Modbus using the WOLF Modbus interface.

Input

Output

Name	Type	Unit
4011_Current pressure suppy duct [Pa]	Modbus	`Pa`
4013_Preset air flowrate [m³_h]	Modbus	`m³/h`
4009_Current Temperature from outside sensor [°C]	Modbus	`°C`
4012_Current pressure exhaust duct [Pa]	Modbus	`Pa`
4002_Appliance type	Modbus	`<v.1>`
4004_Appliance version (basic_plus)	Modbus	`<v.1>`
4010_Current Temperature from dwelling[°C]	Modbus	`°C`
4028_Current supply flowrate [m²_h]	Modbus	`m³/h`
4029_Current exhaust flowrate [m³_h]	Modbus	`m³/h`
4030_Bypass valve position	Modbus	`<v.1>`
4031_Operation bypass valve	Modbus	`<v.1>`
4037_Preheater status	Modbus	`<v.1>`
4038_Preheater power	Modbus	`<v.1>`
4039_Current fault code	Modbus	`<v.1>`
4040_Filter status	Modbus	`<v.1>`
4016_Imbalance permissible	Modbus	`<v.1>`
4022_Preset imbalance [m³_h]	Modbus	`<v.1>`
4041_Geo heater exchange mode	Modbus	`<v.1>`
4047_Geo heater exchange min. temp. [°C]	Modbus	`°C`
4053_Geo heater exchange max temp. [°C]	Modbus	`°C`
4059_No selected CO² Sensor (max 4)	Modbus	`<v.1>`
4060_Value selected CO² Sensor [PPM]	Modbus	`PPM`
6013_Set control mode Bypass	Modbus	`<v.1>`
6001_Value flowrate [m³_h]	Modbus	`<v.1>`
6006_Operation Bypass value	Modbus	`<v.1>`
6004_Imbalance permissible	Modbus	`<v.1>`
6012_Reset Wolf appliance	Modbus	`<v.1>`
6011_CO2 Sensor read out	Modbus	`<v.1>`
6010_Geo heat exchanger max temp.[C°]	Modbus	`<v.1>`
1000_Modbus Slave-Adress	Modbus	`<v.1>`
6005_Preset imbalance [m³_h]	Modbus	`<v.1>`
6007_Filter Reset	Modbus	`<v.1>`
6008_Geo heat exchanger mode	Modbus	`<v.1>`
6009_Geo heat exchanger min temp.[C°]	Modbus	`<v.1>`