Weigl Lift Control

This interface enables the full integration and monitoring of an elevator with up to 30 floors into your Loxone system.

Calls & Destination Selection: Using digital command signals (coils), specific travel commands can be sent for levels L01 through L30. The system identifies the destination floor directly upon receiving the call.

Intelligent Door Control: A special feature is selective door control. When a call is made, you can define which side of the door should open upon arrival: Position 0° (standard) or Position 90° (corner exit).

Door Status & Direction of Travel: The interface allows real-time querying of whether the doors are open, closed, or locked. In addition, the current direction of travel (up/down/stopped) is indicated.

Current position: The system provides the exact floor level of the car (L01–L30) as feedback to the visualization system.

Alarm & fire mode: Special registers monitor emergency call signals and control the fire mode. When activated, the elevator automatically travels to a defined evacuation level and stops with the doors open.

Power Supply & Cabin Lighting: Monitoring the power supply ensures proper operation. The status of the cabin lighting can be queried to connect other lighting in the lobby or surrounding area of the system.

Fore more details have look @ weigl.at