Vestel EVC04
Content languageEnglish
Description
Communication over Modbus RTU is also possible. Notice that perhaps not all values are available over RTU (see the Modbus description in the additional downloads). template supported until version v3.187.0 after this you need to change command of the modbus registers to 4-Read Input Register(0X04) The Charging Current dues not need to be changed.
Inputs and outputs · 35
| Name | Type | Unit |
|---|---|---|
| Date | Modbus | yymmdd |
| Time | Modbus | <v.>hhmmss |
| Chargepoint State | Modbus | <v> |
| Charging State | Modbus | <v> |
| Equipment State | Modbus | <v> |
| Cable State | Modbus | <v> |
| EVSE Fault Code | Modbus | <v> |
| Active Power Total | Modbus | W |
| Current L1 | Modbus | A |
| Current L2 | Modbus | A |
| Current L3 | Modbus | A |
| Voltage L1 | Modbus | V |
| Voltage L2 | Modbus | V |
| Voltage L3 | Modbus | V |
| Active Power L1 | Modbus | W |
| Active Power L2 | Modbus | W |
| Active Power L3 | Modbus | W |
| Meter Reading | Modbus | kWh |
| Chargepoint Power | Modbus | W |
| Session Max Current | Modbus | A |
| EVSE Min Current | Modbus | A |
| EVSE Max Current | Modbus | A |
| Cable Max Current | Modbus | A |
| Session Energy | Modbus | kWh |
| Session Duration | Modbus | s |
| Failsafe Current | Modbus | A |
| Failsafe Timeout | Modbus | s |
| Session End Time | Modbus | hhmmss |
| Charging Current | Modbus | A |
| Number of Phases | Modbus | <v> |
| Session Start Time | Modbus | hhmmss |
| Failsafe Current | Modbus | A |
| Failsafe Timeout | Modbus | s |
| Alive Register | Modbus | <v> |
| Charging Current | Modbus | A |
FAQ
No questions have been answered yet.
Questions and answers
Kann die Vestel EVC04 zwischen 1 und 3 Phasen umschalten? Welcher Ampere-Bereich ist einstellbar
OpenHallo,
wir wollen uns eine Vestel-Wallbox kaufen und per Loxone über den Modbus TCP ansteuern. Das Template hier sieht ja super aus. Nur welchen Ampere-Bereich kann die Wallbox? 1 bis 16?
Über eine kurze Info wären wir sehr dankbar.
Grüße, Christoph und Sebastian Prüm
1 reply
Hello,
For hardware related questions it is best to contact Vestel directly they are able to answer your questions regarding their products.
Update Firmware v3.187.0
OpenSeit dem neueren Update muss man alle Register im Template auf "4 - Read Input Register (0x04)" umstellen -> ausgenommen den "Charging Current"
Dann läufts
Gruß Bernhard
1 reply
Hello Bernhard,
Thank you for the feedback I have added this info in the template.
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in