Template
Umbra Nice DMBM
Content languageEnglish
Description
Connect to the gateway and can control up to 50 or more motors( including additional modules, such as expanders or radio transmitters).
Available functionality
- Complete Up and Down/Stop once the end points have been set - Read the state of the Inputs on the device - Set the motor/blind to a specific position from 0- 100%
More functionality is available and can be added as required, please see the integration document that's attached below.
- Read the state of the blind - Open/Closed/Position - Opening/Closing/Still - Send group commands - Open/Close/Position of multiple blinds - More than the initial 12 Blinds can be controlled using the same pattern
Inputs and outputs · 48
| Name | Type | Command | Unit |
|---|---|---|---|
| Input 1 | Comm | inp * 01 0\v | <v.1> |
| Input 2 | Comm | inp * 02 0\v | <v.1> |
| Input 3 | Comm | inp * 03 0\v | <v.1> |
| Input 4 | Comm | inp * 04 0\v | <v.1> |
| Input 5 | Comm | inp * 05 0\v | <v.1> |
| Input 6 | Comm | inp * 06 0\v | <v.1> |
| Input 7 | Comm | inp * 07 0\v | <v.1> |
| Input 8 | Comm | inp * 08 0\v | <v.1> |
| Input 9 | Comm | inp * 09 0\v | <v.1> |
| Input 10 | Comm | inp * 10 0\v | <v.1> |
| Input 11 | Comm | inp * 11 0\v | <v.1> |
| Input 12 | Comm | inp * 12 0\v | <v.1> |
| Motor 1 Position | Comm | POS > 01 01 <v> FFFF F\r | <v> |
| Motor 1 Close | Comm | cmd > 01 01 04\r | |
| Motor 1 Open | Comm | cmd > 01 01 03\r | |
| Motor 2 Open | Comm | cmd > 01 02 03\r | |
| Motor 2 Close | Comm | cmd > 01 02 04\r | |
| Motor 2 Position | Comm | POS > 01 02 <v> FFFF F\r | <v> |
| Motor 3 Open | Comm | cmd > 01 03 03\r | |
| Motor 3 Close | Comm | cmd > 01 03 04\r | |
| Motor 3 Position | Comm | POS > 01 03 <v> FFFF F\r | <v> |
| Motor 4 Open | Comm | cmd > 01 04 03\r | |
| Motor 4 Close | Comm | cmd > 01 04 04\r | |
| Motor 4 Position | Comm | POS > 01 04 <v> FFFF F\r | <v> |
| Motor 5 Open | Comm | cmd > 01 05 03\r | |
| Motor 5 Close | Comm | cmd > 01 05 04\r | |
| Motor 5 Position | Comm | POS > 01 05 <v> FFFF F\r | <v> |
| Motor 6 Open | Comm | cmd > 01 06 03\r | |
| Motor 6 Close | Comm | cmd > 01 06 04\r | |
| Motor 6 Position | Comm | POS > 01 06 <v> FFFF F\r | <v> |
| Motor 7 Open | Comm | cmd > 01 07 03\r | |
| Motor 7 Close | Comm | cmd > 01 07 04\r | |
| Motor 7 Position | Comm | POS > 01 07 <v> FFFF F\r | <v> |
| Motor 8 Open | Comm | cmd > 01 08 03\r | |
| Motor 8 Close | Comm | cmd > 01 08 04\r | |
| Motor 8 Position | Comm | POS > 01 08 <v> FFFF F\r | <v> |
| Motor 9 Open | Comm | cmd > 01 09 03\r | |
| Motor 9 Close | Comm | cmd > 01 09 04\r | |
| Motor 9 Position | Comm | POS > 01 09 <v> FFFF F\r | <v> |
| Motor 10 Open | Comm | cmd > 01 10 03\r | |
| Motor 10 Close | Comm | cmd > 01 10 04\r | |
| Motor 10 Position | Comm | POS > 01 10 <v> FFFF F\r | <v> |
| Motor 11 Open | Comm | cmd > 01 11 03\r | |
| Motor 11 Close | Comm | cmd > 01 11 04\r | |
| Motor 11 Position | Comm | POS > 01 11 <v> FFFF F\r | <v> |
| Motor 12 Open | Comm | cmd > 01 12 03\r | |
| Motor 12 Close | Comm | cmd > 01 12 04\r | |
| Motor 12 Position | Comm | POS > 01 12 <v> FFFF F\r | <v> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in