Template
Thermia
Content languageEnglish
Description
Via this template you can get sensor information of your Thermia heat pump. This Modbus template support Thermia Genesis heat pumps of the model Calibra, Diplomat & Mega.
This Thermia heat pump template supports two Modbus protocols:
- Modbus RTU (connect to the BM-card (Port: MBe) located in the electrical cabinet) - Modbus TCP/IP (connect to the RJ45 connection located on the display unit)
The configuration for Modbus can be found under BMS in the Settings menu of your Thermia heat pump.
Inputs and outputs · 15
| Name | Type | Unit |
|---|---|---|
| Outdoor temperature | Modbus | °C |
| Tap water weighted temperature | Modbus | °C |
| First priority demand | Modbus | <v> |
| Tap water top temperature | Modbus | °C |
| Tap water lower temperature | Modbus | °C |
| Brine in temperature | Modbus | °C |
| Brine out temperature | Modbus | °C |
| Comfort wheel temperature | Modbus | °C |
| Supply line temperature | Modbus | °C |
| Return line temperature | Modbus | °C |
| Comfort mode | Modbus | <v> |
| Compressor speed RPM | Modbus | RPM |
| Compressor available gears | Modbus | / 9 |
| External additional heater: Current demand_ | Modbus | % |
| Compressor speed percent | Modbus | % |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in