Teltonika router
Content languageEnglish
Description
This integration enables seamless communication between Loxone and Teltonika LTE routers, allowing Loxone systems to send SMS messages, read router data via REST API, and retrieve operational values using Modbus TCP. Using this integration, the Teltonika router becomes an active part of the automation system, not just a network device. Loxone can trigger SMS notifications for alarms, system states, or user-defined events such as security alerts, power failures, or system errors. At the same time, important router information can be retrieved and processed directly within Loxone. In addition to REST API communication, the integration also contains Modbus TCP. Via Modbus TCP, the following values are integrated and available in Loxone:
- RSSI (signal strength) - Device temperature - Amount of transmitted and received data
This allows continuous monitoring of LTE signal quality, device health, and data usage directly from the Loxone system. The integration communicates with the Teltonika router using the official Teltonika Networks REST API and Modbus TCP, ensuring compatibility with supported router models and firmware versions. Secure authentication and reliable communication are handled according to Teltonika’s official documentation.
The integration is based on the official Teltonika API: https://developers.teltonika-networks.com/reference/rutx09/7.19.5/v1.11.1/messages#post-messages-actions-send
Inputs and outputs · 32
| Name | Type | Command | Unit |
|---|---|---|---|
| API 32 | VirtualInHttp | token":"\s31\1 | <v.1> |
| API 2 | VirtualInHttp | token":"\s1\1 | <v.1> |
| API 3 | VirtualInHttp | token":"\s2\1 | <v.1> |
| API 4 | VirtualInHttp | token":"\s3\1 | <v.1> |
| API 5 | VirtualInHttp | token":"\s4\1 | <v.1> |
| API 6 | VirtualInHttp | token":"\s5\1 | <v.1> |
| API 7 | VirtualInHttp | token":"\s6\1 | <v.1> |
| API 8 | VirtualInHttp | token":"\s7\1 | <v.1> |
| API 9 | VirtualInHttp | token":"\s8\1 | <v.1> |
| API 10 | VirtualInHttp | token":"\s9\1 | <v.1> |
| API 11 | VirtualInHttp | token":"\s10\1 | <v.1> |
| API 12 | VirtualInHttp | token":"\s11\1 | <v.1> |
| API 13 | VirtualInHttp | token":"\s12\1 | <v.1> |
| API 14 | VirtualInHttp | token":"\s13\1 | <v.1> |
| API 15 | VirtualInHttp | token":"\s14\1 | <v.1> |
| API 16 | VirtualInHttp | token":"\s15\1 | <v.1> |
| API 17 | VirtualInHttp | token":"\s16\1 | <v.1> |
| API 18 | VirtualInHttp | token":"\s17\1 | <v.1> |
| API 19 | VirtualInHttp | token":"\s18\1 | <v.1> |
| API 20 | VirtualInHttp | token":"\s19\1 | <v.1> |
| API 21 | VirtualInHttp | token":"\s20\1 | <v.1> |
| API 22 | VirtualInHttp | token":"\s21\1 | <v.1> |
| API 23 | VirtualInHttp | token":"\s22\1 | <v.1> |
| API 24 | VirtualInHttp | token":"\s23\1 | <v.1> |
| API 25 | VirtualInHttp | token":"\s24\1 | <v.1> |
| API 26 | VirtualInHttp | token":"\s25\1 | <v.1> |
| API 27 | VirtualInHttp | token":"\s26\1 | <v.1> |
| API 28 | VirtualInHttp | token":"\s27\1 | <v.1> |
| API 29 | VirtualInHttp | token":"\s28\1 | <v.1> |
| API 30 | VirtualInHttp | token":"\s29\1 | <v.1> |
| API 31 | VirtualInHttp | token":"\s30\1 | <v.1> |
| API 1 | VirtualInHttp | token":"\1 | <v.1> |
FAQ
No questions have been answered yet.
Questions and answers
Cannot save Regenerate token HTTP response into file in Miniserver
OpenWhen I request token (manually or with pulse generator) and with this template is HTTP response saved into /user/common/APIKeyTeltonica.xml, when I check https://Miniserver IP/dev/fsget/user/common/APIKeyTeltonica.xml , I get error 404 Not Found, so no response is saved. When I use same settings with local API tester (Insomnia), its working properly. Modbus is working, too. Miniserver 17.1.6.30
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in