Skip to content
Library
Image of Spot Price aWATTar (Price relative)
Template

Spot Price aWATTar (Price relative)

by LoxonautBrand: LOXONENo rating yet1,179 downloads

Content languageEnglish

Download · v1.0.0Add to favourites

Updated Nov 10, 2023

Download · v1.0.0

Description

These inputs are designed to be used with the Spot Price Optimizer block to automate your electricity usage and make your installation as energy efficient as possible. For example, the system could be configured to charge your electric car or heat your hot water during the times of the day where electricity is cheapest, or disable devices with particularly high electricity consumption while electricity is more expensive. We would recommend connecting these inputs to the Spot Price Optimizer like

The difference between the template "absolute" and "relative":

- absolute: you set the block as absolute, use the template Spot Price aWATTar (Price absolute) and will have the prices from 0:00 to 12:00pm from the current day. With this template you can find the cheapest prices for the current day. - relative: you set the block as relative, use the template Spot Price aWATTar (Price relative) and will have the prices from now (=+0) until 24h in the future (=+23h). With this template you can find the cheapest prices in the next 24h.

Inputs and outputs · 24

NameTypeCommandUnit
+0VirtualInHttpdata_price_hour_rel_+00_amount: \v€/kWh
+1VirtualInHttpdata_price_hour_rel_+01_amount: \v€/kWh
+2VirtualInHttpdata_price_hour_rel_+02_amount: \v€/kWh
+3VirtualInHttpdata_price_hour_rel_+03_amount: \v€/kWh
+4VirtualInHttpdata_price_hour_rel_+04_amount: \v€/kWh
+5VirtualInHttpdata_price_hour_rel_+05_amount: \v€/kWh
+6VirtualInHttpdata_price_hour_rel_+06_amount: \v€/kWh
+7VirtualInHttpdata_price_hour_rel_+07_amount: \v€/kWh
+8VirtualInHttpdata_price_hour_rel_+08_amount: \v€/kWh
+9VirtualInHttpdata_price_hour_rel_+09_amount: \v€/kWh
+10VirtualInHttpdata_price_hour_rel_+10_amount: \v€/kWh
+11VirtualInHttpdata_price_hour_rel_+11_amount: \v€/kWh
+12VirtualInHttpdata_price_hour_rel_+12_amount: \v€/kWh
+13VirtualInHttpdata_price_hour_rel_+13_amount: \v€/kWh
+14VirtualInHttpdata_price_hour_rel_+14_amount: \v€/kWh
+15VirtualInHttpdata_price_hour_rel_+15_amount: \v€/kWh
+16VirtualInHttpdata_price_hour_rel_+16_amount: \v€/kWh
+17VirtualInHttpdata_price_hour_rel_+17_amount: \v€/kWh
+18VirtualInHttpdata_price_hour_rel_+18_amount: \v€/kWh
+19VirtualInHttpdata_price_hour_rel_+19_amount: \v€/kWh
+20VirtualInHttpdata_price_hour_rel_+20_amount: \v€/kWh
+21VirtualInHttpdata_price_hour_rel_+21_amount: \v€/kWh
+22VirtualInHttpdata_price_hour_rel_+22_amount: \v€/kWh
+23VirtualInHttpdata_price_hour_rel_+23_amount: \v€/kWh

FAQ

No questions have been answered yet.

Ratings and comments

No ratings or comments yet.

Questions and answers

  1. Energia - Rynek cen godzinowych

    Open

    Bernard Szmigielski

    Witam

    zapoznałem się z Waszym materiałem publikowanym ( https://www.youtube.com/watch?v=Mb6HeVvptc8 ) nie rozumiem jednak jak wysterować wejście TR w module Spot Price Optimizer - prowadząca wideo podpina TriggerSpotPrice O... - nie ma jednak wyjaśnionego sposobu konfiguracji tego wyzwalacza, taka sama sytuacja jest w polskim opisie ( https://library.loxone.com/detail/spot-price-awattar-(price-relative)-1183/overview ) - tu jest wstawiony blok impuls o czasie, ale też nie podano jak dokładnie powinien być zdefiniowany, by moduł Spot Price Optimizer ( zakładam, że to rozbudowana forma multipleksera ) wyświetlał na wyjściach wartośći z aktualnie obowiązującej ceny. Proszę o podpowiedź, bo zależy mi na przetestowaniu tego roziązania nim zdecyduję się na zmianę sposobu rozliczenia

    tel. +48 512 909 726

    Bernard Szmigielski

    No replies

Report this entry

Report abuse

You have to be logged in to report an entry. Log in