Spelsberg Wallbox Smart Pro
Content languageEnglish
Description
Wallbox - ideal for smart charging of private e-vehicles, charging power up to 11 kW (3-phase)/3.7 kW (1-phase) and a maximum charging current of 16 A, variably adjustable charging current in 1A steps, integrated DC fault current detection for DC residual currents of ≥ 6 mA and temperature monitoring for a safe charging process, stylish design and compact housing dimensions for wall and pedestal mounting, protection class IP54, maximum connection cross-section of supply terminal 6 mm², shock resistance IK08, protection class II.
Simple installation and fast configuration and firmware updates with the free-of-charge Spelsberg Wallbox App (available for iOS, Version 14 and higher, and Android Version 6 and higher).
Integrated MID meter for consumption billing, dynamic load management by phase with unbalanced load detection and meter support for external loads, for efficient use of available power, connection to energy management systems (EMS) for external control for charging with solar energy, free charging or contactless authorisation of the charging process by RFID, Plug & Charge (ISO15118) or AutoCharge, LED and audible signals for clear feedback on status changes, analysis of extensive charging statistics via the Spelsberg Wallbox App or external backends.
Supports communication protocols and interfaces:
- USB - WLAN, Ethernet (2 RJ45 LAN-Ports) - Modbus TCP, EEBus, SMA SEMP - OCPP-J 1.6 for connection of external backends
Inputs and outputs · 84
| Name | Type | Unit |
|---|---|---|
| OCPP - CP Status | Modbus | <v> |
| State - Error Codes 1 | Modbus | <v> |
| State - Error Codes 2 | Modbus | <v> |
| State - Error Codes 3 | Modbus | <v> |
| State - Error Codes 4 | Modbus | <v> |
| State - Vehicle (Control Pilot) state | Modbus | <v> |
| State - Charge Point availability | Modbus | |
| Installation - Safe Current | Modbus | A |
| Installation - Hardware current limit | Modbus | A |
| Installation - Operator current limit | Modbus | A |
| System - Firmware version 1 major | Modbus | <v> |
| System - Firmware version 2 minor | Modbus | <v> |
| System - Firmware version 3 patch | Modbus | <v> |
| System - Build Number | Modbus | <v> |
| State - Error Events 1 | Modbus | <v> |
| State - Error Events 2 | Modbus | <v> |
| State - Error Events 3 | Modbus | <v> |
| State - Error Events 4 | Modbus | <v> |
| Installation - Free charging | Modbus | |
| OCPP - Free charging mode | Modbus | <v> |
| Diagnostic - Energy L1 | Modbus | kWh |
| Diagnostic - Energy L2 | Modbus | kWh |
| Diagnostic - Energy L3 | Modbus | kWh |
| Diagnostic - Power L1 | Modbus | W |
| Diagnostic - Power L2 | Modbus | W |
| Diagnostic - Power L3 | Modbus | W |
| Diagnostic - Current L1 | Modbus | A |
| Diagnostic - Current L2 | Modbus | A |
| Diagnostic - Current L3 | Modbus | A |
| Diagnostic - Total energy | Modbus | kWh |
| Diagnostic - Total power | Modbus | kW |
| Diagnostic - Voltage L1 | Modbus | V |
| Diagnostic - Voltage L2 | Modbus | V |
| Diagnostic - Voltage L3 | Modbus | V |
| DLM - Mode | Modbus | <v> |
| DLM - Sub-distribution Limit L1 | Modbus | A |
| DLM - Sub-distribution Limit L2 | Modbus | A |
| DLM - Sub-distribution Limit L3 | Modbus | A |
| DLM - Operator Sub-distribution Limit L1 | Modbus | A |
| DLM - Operator Sub-distribution Limit L2 | Modbus | A |
| DLM - Operator Sub-distribution Limit L3 | Modbus | A |
| DLM - External Meter support | Modbus | |
| DLM - Number of Slaves connected | Modbus | <v> |
| DLM - Overall Current applied L1 | Modbus | A |
| DLM - Overall Current applied L2 | Modbus | A |
| DLM - Overall Current applied L3 | Modbus | A |
| DLM - Overall Current available L1 | Modbus | A |
| DLM - Overall Current available L2 | Modbus | A |
| DLM - Overall Current available L3 | Modbus | A |
| 15118 - Scheduled Time | Modbus | <v> |
| 15118 - Scheduled Date | Modbus | <v> |
| State - Maximum charging current offered | Modbus | A |
| Installation - Charging minimum current limit | Modbus | A |
| 15118 - EV required energy | Modbus | Wh |
| 15118 - Charging max. current EV | Modbus | A |
| Report - Session Charged Energy | Modbus | Wh |
| Report - Charging session duration | Modbus | <v.t>s |
| HEMS - RFID tag ID 1 | Modbus | <v> |
| HEMS - RFID tag ID 2 | Modbus | <v> |
| HEMS - RFID tag ID 3 | Modbus | <v> |
| HEMS - RFID tag ID 4 | Modbus | <v> |
| HEMS - RFID tag ID 5 | Modbus | <v> |
| 15118 - EV battery state percent | Modbus | % |
| 15118 - Smart vehicle detected | Modbus | |
| 15118 - EVCCID 1 | Modbus | <v> |
| 15118 - EVCCID 2 | Modbus | <v> |
| 15118 - EVCCID 3 | Modbus | <v> |
| 15118 - Remaining time to full SoC | Modbus | s |
| 15118 - Is in charging loop | Modbus | |
| State - Session authorization source | Modbus | <v> |
| HEMS - Current Limit | Modbus | A |
| State - Charge Point availability | Modbus | |
| Installation - Safe current | Modbus | A |
| Installation - Free charging | Modbus | |
| Installation - OCPP Free charging mode | Modbus | <v> |
| DLM - Operator EVSE Sub-distribution Limit L1 | Modbus | A |
| DLM - Operator EVSE Sub-distribution Limit L2 | Modbus | A |
| DLM - Operator EVSE Sub-distribution Limit L3 | Modbus | A |
| HEMS - Current Limit | Modbus | A |
| HEMS - RFID tag ID 1 | Modbus | <v> |
| HEMS - RFID tag ID 2 | Modbus | <v> |
| HEMS - RFID tag ID 3 | Modbus | <v> |
| HEMS - RFID tag ID 4 | Modbus | <v> |
| HEMS - RFID tag ID 5 | Modbus | <v> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in