SolarLog Data Reading via Modbus TCP

With this library you have direct access to all relevant data of your solar plant without having to install further expensive meters or interfaces. Even encrypted data of an inverter can be read out directly if it provided by the SolarLog. Further programming in the Loxone system is also largely unnecessary. No additional meters, interfaces and cabling are required.

To read out data from your SolarLog PV-Logger, simply add a Modbus Server with your Loxone Config and import this library.

Configure the Modbus-Server with the IP address of your SolarLog and the port address 502.

Your SolarLog may need a software update to enable the Modbus TCP function. You can find the current software on the SolarLog homepage.

A Modbus license is not required. All data implemented here can be read out without an additional license. This library reads all free values of your SolarLog via Modbus TCP.

Modbus TCP port: • 502

Minimum firmware required for the SolarLog • 2.8.1 Build 49

Slave ID: • 1