Template
Siemens Sentron PAC 2200
Content languageEnglish
Description
Modbus TCP template for mostly used functions of this energy meter
Inputs and outputs · 18
| Name | Type | Unit |
|---|---|---|
| Voltage L1-N | Modbus | V |
| Voltage L2-N | Modbus | V |
| Voltage L3-N | Modbus | V |
| Voltage L1-L2 | Modbus | V |
| Voltage L2-L3 | Modbus | V |
| Voltage L3-L1 | Modbus | V |
| Current L1 | Modbus | A |
| Current L2 | Modbus | A |
| Current L3 | Modbus | A |
| Apparent Power L1 | Modbus | VA |
| Apparent Power L2 | Modbus | VA |
| Apparent Power L3 | Modbus | VA |
| Active Power L1 | Modbus | W |
| Active Power L2 | Modbus | W |
| Active Power L3 | Modbus | W |
| Total Apparent Power | Modbus | VA |
| Total Active Power | Modbus | W |
| Total Reactive Power | Modbus | var |
FAQ
No questions have been answered yet.
Questions and answers
PAC2200 Values
OpenDear Creator,
May I ask you a question about the received values from PAC2200 The relevant values for my are, how much Power I'm Importing or Exporting from the Grid. The value I currently use is Apparent Power (SUM) kVA, but the values are always positive and never never negative. Question: how can I determine if the Power is Ext- or Imported?
There is also a big difference comparing the Power values from the PAC2200 and the values displayed on my SmartMeter
any hints?
greetings jacques
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in