Template
Schwörer room ventilation
Content languageEnglish
Description
To connect the room ventilation system to the Miniserver, you will need a Modbus Extension. More about Schwörer room ventilation here.
Inputs and outputs · 32
| Name | Type | Unit |
|---|---|---|
| 100 - operating mode | Modbus | <v> |
| 102 - current air level | Modbus | <v> |
| 101 - manual air level | Modbus | Stufe |
| 932 - target temperature room 1 | Modbus | °C |
| 948 - auxiliary heater enable room 1 | Modbus | <v.1> |
| 230 - heating-cooling function | Modbus | <v.1> |
| 231 - heating pump - heating | Modbus | <v.1> |
| 232 - heating pump - cooling | Modbus | <v.1> |
| 240 - error message | Modbus | <v> |
| 253 - emergency mode | Modbus | <v> |
| 242 - pressure monitor active | Modbus | <v> |
| 243 - EVU locker active | Modbus | <v> |
| 244 - door open | Modbus | <v> |
| 245 - device filter dirty | Modbus | <v> |
| 246 - prelocated filter dirty | Modbus | <v> |
| 247 - low fare off | Modbus | <v> |
| 248 - powersupply off | Modbus | <v> |
| 250 - Pressostat activated | Modbus | <v> |
| 251 - EVU locker extern active | Modbus | <v> |
| 252 - heating module test operation active | Modbus | <v> |
| 254 - air intake too cold | Modbus | <v> |
| 265 - remaining time device filter | Modbus | Tage |
| 263 - remaining time prelocated filter | Modbus | Tage |
| manual air level | Modbus | <v> |
| 100 - operating mode | Modbus | <v> |
| 932 - target temperature room 1 | Modbus | °C |
| 900 - current temperature room 1 | Modbus | <v.1> |
| 948 - auxiliary heater enable room 1 | Modbus | <v.1> |
| 230 - heating-cooling function | Modbus | <v.1> |
| 231 - heating pump - heating | Modbus | <v.1> |
| 232 - heating pump - cooling | Modbus | <v.1> |
| 241 - Error Reset | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in