Template

Reolink API + Intercom

Name: Reolink API + Intercom
Author: Manuel Campei

by Manuel CampeiNo rating yet2,448 downloads

Content languageEnglish

Download · v1.0.7 Add to favourites

Updated Jun 20, 2024

Download · v1.0.7

Description

VIRTUAL OUTPUTS:

IR LIGHTS > OFF/ON-AUTO REBOOT > GET/POST REC > ON/OFF WHITE LED > ON/OFF SIREN > PULSE SIREN ON/OFF BY MOTION SIREN ON/OFF MANUAL PUSH > ON/OFF ALL PUSH OFF ANIMALS, PUSH OFF MOTION, PUSH OFF PEOLPE, PUSH OFF VEHICLE, PUSH ON ANIMALS, PUSH ON MOTION, PUSH ON PEOLPE, PUSH ON VEHICLE, EMAIL ON/OFF

VIRTUAL INPUTS:

GETMDSTATE > STATUS OF MOTION DETECTION

(For the GETMDSTATE, download the single file at the bottom "VI_REOLINK GETMDSTATE.xml" and 3.8.5 - GetMdState.txt)

Currently tested on 3 models, I am still testing other models. Please note that features such as SIREN and WHITE LED are only available on some models!

Cameras tested: RLC-510A, RLC-1224A, RLC 1212A

The changes that need to be made are:

1. Enter your own IP address in the “virtual output”. 2. Under the settings (virtual outputs) go to > ...&channel=user=test&password=694813 3. Replace “test” >(user) and “694813” >(password) with your login details.

In the file "Reolink-Api-Intercom-1.0.6b.Loxone" I have brought together the commands that have ON/OFF, it might be more interesting for some people.

INTERCOM:

I have now also added the stream for the intercom.

Simply paste the link below under "Image when ringing" and "Video stream internal" (but insert your own credentilas + IP address) For the “External Video Stream” simply copy the same link, but enter “clouddns” instead of the IP address.

If you operate your camera with a different HTTP port, simply enter it as follows: (1234 > enter your port)

E.g.: http://192.168.100.78:1234/cgi-bin.... E.g.: http://clouddns:1234/cgi-bin....

Internal Link + Image when ringing: http://192.168.100.78/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=test&password=694813

External Link: http://clouddns/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=test&password=694813

For remoteConnect: http://remoteConnect/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=flsYJfZgM6RTB_os&user=test&password=694813

I will try to add more API in next versions.

Inputs and outputs · 17

Name	Type	Command
WHITE LED ON/OFF	VirtualOut	`/api.cgi?cmd=SetWhiteLed&channel=user=test&password=694813`
SIEREN OFF	VirtualOut	`/api.cgi?cmd=AudioAlarmPlay&channel=user=test&password=694813`
SIEREN ON PULSE	VirtualOut	`/api.cgi?cmd=AudioAlarmPlay&channel=user=test&password=694813`
SIREN ON/OFF on MOTION	VirtualOut	`/api.cgi?cmd=SetAudioAlarmV20&channel=user=test&password=694813`
REBOOT GET	VirtualOut	`/api.cgi?cmd=Reboot&channel=user=test&password=694813`
IR ON /AUTO-OFF	VirtualOut	`/api.cgi?cmd=SetIrLights&channel=user=test&password=694813`
IR OFF	VirtualOut	`/api.cgi?cmd=SetIrLights&channel=user=test&password=694813`
REBOOT POST	VirtualOut	`/api.cgi?cmd=Reboot&channel=user=test&password=694813`
REC ON/OFF	VirtualOut	`/api.cgi?cmd=SetRecV20&user=test&password=694813`
PUSH - ALL ON/OFF	VirtualOut	`/api.cgi?cmd=SetPush&user=test&password=694813`
PUSH - ANIMALS ON/OFF	VirtualOut	`/api.cgi?cmd=SetPush&user=test&password=694813`
PUSH - PEOLPE ON/OFF	VirtualOut	`/api.cgi?cmd=SetPush&user=test&password=694813`
PUSH - VEHICLE ON/OFF	VirtualOut	`/api.cgi?cmd=SetPush&user=test&password=694813`
PUSH - MOTION ON/OFF	VirtualOut	`/api.cgi?cmd=SetPush&user=test&password=694813`
WHITE LED ON	VirtualOut	`/api.cgi?cmd=SetWhiteLed&channel=user=test&password=694813`
SET EMAIL V20	VirtualOut	`/api.cgi?cmd=SetEmailV20&user=test&password=694813`
SIREN ON/OFF	VirtualOut	`/api.cgi?cmd=AudioAlarmPlay&channel=user=test&password=694813`

FAQ

No questions have been answered yet.

Ratings and comments

No ratings or comments yet.

Questions and answers

Compatibility
Open
Martin FirschingFeb 9, 2024
Hi Manuel, I tested it with RLC-1224A and RLC-1212A and it works perfeclty fine, i just had to add the http-port to the network address. Thanks a lot! Cheers, Martin
1 reply
1. Manuel CampeiCreatorFeb 9, 2024
  Hi Martin,
  Great, I'm glad it works.
  I'll try to add the recording function as soon as I find the time.
  Best regards Manuel
Info
Open
Mariusz SzepietowskiSep 24, 2024
Just info that it works fine with model RLC-520A (version IPC_MS1NA45MP) for snapshot and video. But no commands to/from camera (except Reboot POST that works fine).
1 reply
1. Manuel CampeiCreatorJan 25, 2025
  All right, thank you very much.
2-way audio
Open
Koen D.Oct 30, 2024
Does 2-way audio work ?
1 reply
1. Manuel CampeiCreatorJan 25, 2025
  Unfortunately no, according to reolink this is not possible.
ARGUS SEries B310
Open
Timo HunzikerFeb 11, 2025
Hello Manuel, Thank you for the template. I am using an ARGUS Series B310. With this camera, I have the option to change the ports, etc., in the app under network settings. At the moment, it is not working with this camera. Can you tell me which ports I could use instead?
Best regards, Timo
1 reply
1. Manuel CampeiCreatorFeb 11, 2025
  Hello Timo,
  I'm glad you like it. I've never tested your camera,
  but it should work with the standard port 80 (if it isn't changed). If the port is/is changed,
  simply test the commands with the selected port.
  As I said, I've never tested the ARGUS Series B310, so I can't say whether the commands will work for your camera.
  Regards Manuel
NVR support
Open
Louis VanrobaeysJun 12, 2025
Hi, Would this also work for Reolink NVR or camera's directly connected to a NVR?
1 reply
1. Manuel CampeiCreatorJun 14, 2025
  Hello,
  I haven't tested this yet.
Disable stiings
Open
Bram EerkesSep 2, 2025
Is it possible to disable the Settings in the user interface?
2 replies
1. Manuel CampeiCreatorSep 2, 2025
  In which user interface?
2. Bram EerkesSep 2, 2025
  er zijn standaard 2 knoppen onder in het scherm, een daarvan is instellingen de andere licht. de licht buton kan ik manipuleren of verwijderen maar de settings knop niet..
REOLink with MJPG
Open
Kristan KlettSep 4, 2025
Hi Manuel, thanks so much for your hard work and sharing it with us.
In loxwiki I have read a tread, that REOLink does not provide MJPG live streams but H.264 only. AFAIK Loxone Custom Intercom just supports (M)JPG. With the result, that Loxone just captures still images every second instead of a live stream.
Can you confirm this? Or did REOLink changed something in the meantime?
Warm Regards, Kristan
1 reply
1. Manuel CampeiCreatorSep 4, 2025
  Hi Kristian,
  I'm glad you like it.
  Yes, that's absolutely right, Reolink doesn't support MJPG streaming, currently only h264. I can't say whether something will come along in time.
  Best regards,
  Manuel
NVR support
Open
Igor KrištofOct 23, 2025
Hi, I'm replying to question from Louis Vanrobaeys,
"Would this also work for Reolink NVR or camera's directly connected to a NVR?" Yes it works, but NVR gives only one IP and only camera on first place in NVR will be displayed...
BR
1 reply
1. Manuel CampeiCreatorNov 27, 2025
  Hi,
  I've never tested this with an NVR, only with the individual cameras.
  Best regards
Reolink DoorBell POE - GetEvents
Open
Tom AbrahamNov 24, 2025
Hi,
I've tried your GetMDState and this one works, but I've tried with a newer API command "GetEvents" and now Loxone HTTP won't register the change, so it doesn't work for me.
GetEvents add-on https://community.reolink.com/topic/4196/reolink-camera-api-user-guide_v8-updated-in-april-2023/6
Result from the link from my Doorbell: [ { "cmd" : "GetEvents", "code" : 0, "value" : { "ai" : { "dog_cat" : { "alarm_state" : 0, "support" : 1 }, "face" : { "alarm_state" : 0, "support" : 0 }, "package" : { "alarm_state" : 0, "support" : 0 }, "people" : { "alarm_state" : 0, "support" : 1 }, "vehicle" : { "alarm_state" : 0, "support" : 1 } }, "channel" : 0, "md" : { "alarm_state" : 0, "support" : 1 }, "visitor" : { "alarm_state" : 0, "support" : 1 } } } ]
Command Recognition: "md" : { "alarm_state" :\v
But i don't see a change in value in my liveview from Loxone. Do you have any advice? I would like to use this, so if a visitor pushes the bell, I can use this as a trigger to light my entrance
1 reply
1. Manuel CampeiCreatorNov 27, 2025
  Hi,
  I don't have a doorbell, so I can't test it.
  If I ever get one, I'll test it.
  Best regards
Reolink Home Hub scenes
Open
Marc HennigMar 5, 2026
Hello Manuel,
first of all thanks for the effort doing this. I have bought a Home Hub from Reolink, and basically and has 3 standard scenes. It would be great, to trigger those scense via your plugin. In that case, you could push the leave home button, the alarm gets active and the scene for away as well.
Maybe you could think about it.
Thanks and BR Marc
1 reply
1. Manuel CampeiCreatorApr 12, 2026
  Hi,
  Sorry for the late reply, I completely missed your email.
  I've never used the Reolink Hub before, but if I ever get one, I'd be happy to test it.
  Thanks a lot Best regards
  Manuel
Bewegungserkennung in Loxoen mitteilen
Open
Manuel StampflApr 12, 2026
Hallo Manuel,
vielen Dank für das tolle Plugin! Es läuft bereits super.
Wäre es möglich, eine Funktion zu ergänzen, die die Bewegungserkennung der Reolink-Kameras direkt an Loxone weitergibt? Da Reolink eine sehr zuverlässige KI-Erkennung besitzt, könnte man so die Außenbeleuchtung viel gezielter steuern.
Mein Ziel ist es, das Licht nur dann einzuschalten, wenn die Kamera tatsächlich einen Menschen erkennt – und eben nicht bei vorbeifahrenden Fahrzeugen, Tieren oder sich bewegenden Bäumen.
Vielen Dank für deine Mühe!
1 reply
1. Manuel CampeiCreatorApr 12, 2026
  Hallo Manuel,
  Super, freut mich. =)
  Ja müsste soweit machbar sein, allerdings habe ich erst in 3 Wochen Zeit das zu testen =D Ich melde mich sobald ich was gefunden habe.
  Klar gerne.
  Liebe Grüße
Open
Manuel StampflMay 17, 2026
Hallo Manuel,
ich wollte mich einfach mal kurz melden und nachhören, ob du schon Zeit für einen Test gefunden hast? Konntest du bezüglich der Reolink-Bewegungserkennung in Loxone schon was programmieren?
Liebe Grüße, Manuel
No replies

Report this entry

Report abuse

You have to be logged in to report an entry. Log in

Details

Template type: Template
Latest version: 1.0.7
Published: Feb 3, 2024

Files11

Version history (4)

Version 1.0.7Jun 20, 2024
Added: 3.3.7 - GetEmailV2 3.3.8 - SetEmailV2 - Email Notificatons ON/OFF 3.8.12 - AudioAlarmPlay (SIREN MANUAL ON/OFF)
Version 1.0.6Feb 23, 2024
Chanded description: PUSH ON to PUSH ON ALL, PUSH OFF to PUSH OFF ALL
Added: PUSH ON/OFF ANIMALS, PUSH ON/OFF MOTION, PUSH ON/OFF PEOLPE, PUSH ON/OFF VEHICLE
Version 1.0.3Feb 15, 2024
Added:
1. PUSH - ON/OFF 2. REBOOT - POST 3. REC - ON/OFF
Canged:
1. Change description "SIREN ON" to "SIREN ON BY MOTION" 2. Change description "SIREN OFF" to "SIREN OFF BY MOTION"
Version 1.0.1Feb 9, 2024
Added commands: White LED > ON/OFF, SIREN > PULSE / ON / OFF

Supported devices

RLC-510A
RLC-1224A
RLC-1212A
MORE

Support contact

For questions, suggestions or problems, please contact:

Email: [email protected]
Phone: +393335951359

Description

Inputs and outputs · 17

FAQ

Ratings and comments

Questions and answers

Compatibility

Info

2-way audio

ARGUS SEries B310

NVR support

Disable stiings

REOLink with MJPG

NVR support

Reolink DoorBell POE - GetEvents

Reolink Home Hub scenes

Bewegungserkennung in Loxoen mitteilen

Report abuse