Template
Regmet CHM1CF - TFT display controller
Content languageEnglish
Description
The controller shows the temperature, humidity and CO2 concentration in the room, or the temperature and humidity from an external source. Each of the 163 predefined symbols in different colors can be displayed in each position. The three buttons on the display can be used to change the desired temperature or humidity, or to control Loxone system using predefined symbols. The device can be delivered in various design versions, e.g. Merten M-Plan, Gira, etc.
Inputs and outputs · 25
| Name | Type | Unit |
|---|---|---|
| 1: 0x02 Relative humidity | Modbus | <v.1> |
| 0: 0x01 Temperature | Modbus | <v.1> |
| 18: 0x19 Mode S3 | Modbus | <v.1> |
| 16: 0x17 Mode S1 | Modbus | <v.1> |
| 17: 0x18 Mode S2 | Modbus | <v.1> |
| 5: 0x06 CO2 concentration | Modbus | <v.1> |
| 9: 0x10 Required humidity | Modbus | <v.1> |
| 8: 0x09 Required temperature | Modbus | <v.1> |
| 16: 0x17 Required mode 1 | Modbus | <v.1> |
| 17: 0x18 Required mode 2 | Modbus | <v.1> |
| 76: 0x77 Offset temperature | Modbus | <v.1> |
| 28: 0x29 Status register | Modbus | <v.1> |
| 33: 0x34 LCD contrast | Modbus | <v.1> |
| 18: 0x19 Required mode 3 | Modbus | <v.1> |
| 24: 0x25 Symbol at position 1 | Modbus | <v.1> |
| 25: 0x26 Symbol at position 2 | Modbus | <v.1> |
| 26: 0x27 Symbol at position 3 | Modbus | <v.1> |
| 37: 0x38 LCD symbol color | Modbus | <v.1> |
| 36: 0x37 LCD value color | Modbus | <v.1> |
| 6: 0x07 (User value 1) | Modbus | <v.1> |
| 7: 0x08 (User value 2) | Modbus | <v.1> |
| 39: 0x40 Bit Field (external values) | Modbus | <v.1> |
| 35: 0x36 LCD backlight time | Modbus | <v.1> |
| 13: 0x14 Required CO2 | Modbus | <v.1> |
| 77: 0x78 Offset relative humidity | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in