Template
Qlab Production and Lighting
Content languageEnglish
Description
Simply change the IP address to the Mac computer running Qlab and you're off and running. I always recommend stationary IPs on a hard wired network connection only, true with any UDP communication. This template is being used to control Qlab specific to lighting control. Of course you can cue anything you have programmed Qlab to do such as syncing video playback and sound effects to lighting in perfect timing.
Inputs and outputs · 14
| Name | Type | Command | Unit |
|---|---|---|---|
| 5 Sec Color Fade | VirtualOut | /cue/4.5/start | |
| 2 Sec Color Fade | VirtualOut | /cue/11/start | |
| Red | VirtualOut | /cue/110/start | |
| Green | VirtualOut | /cue/90/start | |
| Amber | VirtualOut | /cue/70/start | |
| Ocean | VirtualOut | /cue/140/start | |
| Pink | VirtualOut | /cue/60/start | |
| Purple | VirtualOut | /cue/100/start | |
| Strobe | VirtualOut | /cue/50/start | |
| Fade Off | VirtualOut | /cue/40/start | |
| Yellow | VirtualOut | /cue/120/start | |
| Blue | VirtualOut | /cue/80/start | |
| Morning | VirtualOut | /cue/130/start | |
| Half Sec Color Fade | VirtualOut | /cue/29/start |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in