Template
PRO-VENT RC7 Premium
Content languageEnglish
Description
Template for a PRO-VENT recuperator, model RC7 Premium.
Inputs and outputs · 48
| Name | Type | Unit |
|---|---|---|
| Ventilation gear set | Modbus | <v.1> |
| Heater or cooler workmode device 1 | Modbus | <v.1> |
| Current year | Modbus | <v.1> |
| Current minute | Modbus | <v.1> |
| Current month | Modbus | <v.1> |
| Current hour | Modbus | <v.1> |
| Current workmode | Modbus | <v.1> |
| Maximum CO2 concentration | Modbus | <v.1> |
| Maximum relative air humidity | Modbus | <v.1> |
| Bypass workmode | Modbus | <v.1> |
| GHE workmode | Modbus | <v.1> |
| Set temperature for the device 1 | Modbus | <v.1> |
| Set temperature for the device 2 | Modbus | <v.1> |
| Heater or cooler workmode device 2 | Modbus | <v.1> |
| CleanR workmode | Modbus | <v.1> |
| Set point value of PM10 for normal filtration | Modbus | <v.1> |
| Airing time | Modbus | <v.1> |
| Day ionization mode | Modbus | <v.1> |
| Ionization mode at night | Modbus | <v.1> |
| Time to replace filters | Modbus | <v.1> |
| Current supply ventilation capacity | Modbus | <v.1> |
| Current ventilation capacity | Modbus | <v.1> |
| Current position of the bypass | Modbus | <v.1> |
| The current power of the pre-heater | Modbus | <v.1> |
| Current position of the recirculation damper | Modbus | <v.1> |
| CO2 concentration | Modbus | <v.1> |
| Relative humidity | Modbus | <v.1> |
| Supply air temperature | Modbus | <v.1> |
| Extract air temperature | Modbus | <v.1> |
| Inlet temperature | Modbus | <v.1> |
| The discharge temperature | Modbus | <v.1> |
| Outside temperature | Modbus | <v.1> |
| The current value of PM10 | Modbus | <v.1> |
| The current value of PM2.5 | Modbus | <v.1> |
| The current value of PM1 | Modbus | <v.1> |
| Ventilation workmode | Modbus | |
| Filters will need to be replaced soon. | Modbus | |
| Bypass state | Modbus | |
| Airflow status | Modbus | |
| Set temperature for the device 1 | Modbus | <v.1> |
| Ventilation gear set | Modbus | <v.1> |
| Airing | Modbus | |
| Bypass workmode set | Modbus | <v.1> |
| GHE workmode | Modbus | <v.1> |
| Set airing time | Modbus | <v.1> |
| Workmode for device 1 | Modbus | <v.1> |
| Set temperature for the device 2 | Modbus | <v.1> |
| Workmode device 2 | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in