Template
PRO-VENT RC7 Easy
Content languageEnglish
Description
Template for a PRO-VENT recuperator, model RC7 Easy.
Inputs and outputs · 31
| Name | Type | Unit |
|---|---|---|
| Actual minute | Modbus | <v.1> |
| Ventilation gear set | Modbus | <v.1> |
| Ventilation operating mode | Modbus | <v.1> |
| Actual hour | Modbus | <v.1> |
| Actual day | Modbus | <v.1> |
| Season work mode | Modbus | <v.1> |
| Airing time | Modbus | <v.1> |
| Time to replace filters | Modbus | <v> |
| The set type of ventilation | Modbus | <v.1> |
| Bypass operation mode | Modbus | <v.1> |
| GHE operation mode | Modbus | <v.1> |
| Set temperature for the heater or cooler | Modbus | <v.1> |
| Heater or cooler operation mode | Modbus | <v.1> |
| Temperature measured in the heater or cooler | Modbus | <v.1> |
| Current power of the heater or cooler | Modbus | <v.1> |
| Emergency stop status | Modbus | <v.1> |
| Airing status | Modbus | |
| Bypass state | Modbus | |
| GHE state | Modbus | |
| Condition of the heater or cooler | Modbus | |
| PM10 actual value | Modbus | <v.1> |
| PM2.5 actual value | Modbus | <v.1> |
| PM1 actual value | Modbus | <v.1> |
| Change filter | Modbus | |
| Ventilation gear | Modbus | <v.1> |
| Set temperature for the heater or cooler | Modbus | <v.1> |
| Set bypass mode | Modbus | <v.1> |
| Set GHE operation mode | Modbus | <v.1> |
| Heater or cooler operation mode | Modbus | <v.1> |
| Set type of ventilation | Modbus | <v.1> |
| Activate airing | Modbus |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in