Template
Oxycom adiabatic cooling intercool
Content languageEnglish
Description
Please config modbus board with attached config layout. Ignore error modbus 227 when using ethernet modbus.
Inputs and outputs · 66
| Name | Type | Unit |
|---|---|---|
| 244 WATER_CONSUMPTION_COUNTER_CUBIC | Modbus | m3 |
| 245 WATER_CONSUMPTION_COUNTER_LITER | Modbus | l |
| 246 WATER_FLOW_CURRENT | Modbus | l |
| 249 ENERGY_METER_KWH | Modbus | KW/H |
| 251 ENERGY_METER_WATT | Modbus | KW/H |
| 700 R_OPERATION_MODE | Modbus | <v> |
| 701 R_OUTDOOR_TEMPERATURE_SENSOR | Modbus | °C |
| 703 R_INTRCOOLL_SUPPLY_TEMPERATURE_SENSOR | Modbus | °C |
| 702 R_HEAT_RECLAIM_SUPPLY_TEMP | Modbus | °C |
| 705 R_WATER_LEVEL | Modbus | step |
| 713 R_DAMPER_VENTILATION | Modbus | % |
| 720 R_WATER_CONDUCTIVITY | Modbus | uS/cm |
| 733 R_WATER_MANAGMENT_MODE | Modbus | <v.1> |
| 218 ALARM_ACTIVE | Modbus | <v.1> |
| 219 ALARM_1 | Modbus | <v.1> |
| 220 ALARM_2 | Modbus | <v.1> |
| 221 ALARM_3 | Modbus | <v.1> |
| 222 ALARM_4 | Modbus | <v.1> |
| 223 ALARM_5 | Modbus | <v.1> |
| 224 ALARM_6 | Modbus | <v.1> |
| 225 ALARM_7 | Modbus | <v.1> |
| 226 ALARM_8 | Modbus | <v.1> |
| 227 ALARM_9 | Modbus | <v.1> |
| 228 ALARM_10 | Modbus | <v.1> |
| 229 ALARM_11 | Modbus | <v.1> |
| 230 ALARM_12 | Modbus | <v.1> |
| 231 ALARM_13 | Modbus | <v.1> |
| 722 R_PUMP | Modbus | <v.1> |
| 723 R_WATER_DISINFECTION | Modbus | <v.1> |
| 724 R_SUPPLY_SOLENOID | Modbus | <v.1> |
| 725 R_DRAIN_VALVE | Modbus | <v.1> |
| 726 R_FREEZE_PROTECTION_VALVE | Modbus | <v.1> |
| 100 THERMOSTAT_ON_OFF | Modbus | <v.1> |
| 525 C_HYGIENE_ON_OFF | Modbus | <v.1> |
| 103 THERMOSTAT_P_FAN_SPEED_OR_THERMOSTAT_NP_TEMP_SETPOINT | Modbus | % |
| 111 THERMOSTAT_ACTUAL_OPERATION_MODE | Modbus | <v.1> |
| 110 THERMOSTAT_SELECTED_OPERATION_MODE | Modbus | <v.1> |
| 292 UNIT_ON_OFF | Modbus | <v.1> |
| 731 Baromatic presure | Modbus | <v.1> |
| 307 Minimum Excaust | Modbus | <v.1> |
| 801 Manual mode selection | Modbus | <v.1> |
| 716 Suply fan | Modbus | <v.1> |
| 103 THERMOSTAT_P_FAN_SPEED_OR_THERMOSTAT_NP_TEMP_SETPOINT | Modbus | % |
| 110 THERMOSTAT_SELECTED_OPERATION_MODE | Modbus | Mode |
| 111 THERMOSTAT_ACTUAL_OPERATION_MODE | Modbus | Mode |
| 203 DIGITAL_INPUT_J12_FUNCTION | Modbus | <v.1> |
| 307 H_MINIMUM_EXHAUST_VENTILATION | Modbus | % |
| 308 H_MAXIMUM_EXHAUST_VENTILATION | Modbus | % |
| 401 FC_RELEASE_TEMERATURE | Modbus | °C |
| 501 C_RELEASE_TEMPERATURE | Modbus | °C |
| 502 C_FAN_1_MINIMUM_SPEED | Modbus | % |
| 503 C_FAN_1_MAXIMUM_SPEED | Modbus | % |
| 515 C_MAX_CONDUCTIVITY | Modbus | us/cm |
| 526 C_HYGIENE_START_TIME | Modbus | <v.1> |
| 530 C_WINTER_START | Modbus | <v.1> |
| 531 C_WINTER_END | Modbus | <v.1> |
| 100 THERMOSTAT_ON_OFF | Modbus | <v.1> |
| 239 ALARM_RESET | Modbus | <v.1> |
| 292 UNIT_ON_OFF | Modbus | <v.1> |
| 300 H_ENABLE | Modbus | <v.1> |
| 400 FC_ENABLE | Modbus | <v.1> |
| 500 C_ENABLE | Modbus | <v.1> |
| 525 C_HYGIENE_ON_OFF | Modbus | <v.1> |
| 529 C_WINTER_MODE | Modbus | <v.1> |
| 100 THERMOSTAT_ON_OFF holding | Modbus | |
| 801 Manual mode selection | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in