Skip to content
Library
Image of Orno OR-WE-417 3-pahse power meter
Template

Orno OR-WE-417 3-pahse power meter

by metaebene RC smart solutions e.U.No rating yet505 downloads

Content languageEnglish

Download · v1.0.0Add to favourites

Updated Nov 3, 2022

Download · v1.0.0

Description

If you have multiple modbus devices on the same bus you have to use orno software to change the modbus address (default is 1) of the device.

Inputs and outputs · 16

NameTypeUnit
S0 output rateModbusimp/kWh
L1 VoltageModbusV
L1 CurrentModbusA
Total active energy (kWh)ModbuskWh
L2 CurrentModbusA
L3 CurrentModbusA
L2 VoltageModbusV
L3 VoltageModbusV
Active Power (kW)ModbuskW
Reactive Power (VA)ModbusVA
Power FactorModbusPF
Total Energy INModbuskWh
Total Energy OUTModbuskWh
Baud RateModbus<v>
A3ModbusA
Modbus ID 715Modbus<v>

FAQ

No questions have been answered yet.

Ratings and comments

No ratings or comments yet.

Questions and answers

  1. got weird results from from the orno 517

    Open

    Peter Hufnagel

    Hello Folks,

    I tried your setup for Orno 517 and got weird results. can you help me to get the orzo 517 running? e.G. L1 Voltage 2733242342424234234234,0V L2 Voltage 2733242342424234234234,0V L3 Voltage 0,0V

    Peter P.S. I added 517 to the Modbus directly ion the LOXONE Wallbox Tree

    5 replies

    1. metaebene smart solutionsCreator

      Hi. Afaik does the Wallbox currently have some issues with some modbus devices. For me the template works flawlessly. But I have it connected via modbus extension.

    2. Peter Hufnagel

      hmmm - I also would have the ability to take the extension . bit I think that is not the intention of LOXONE

    3. Christoph Moser

      Hello, I seem to have similar issues (Orno 517 and Wallbox Air modbus). Have you found a solution?

    4. Romain Dechaux

      Same issue here on the modbus extension

    5. Richard Starý

      I believe the issue is caused by having "16bit register" option selected by default. In the manual, all the voltage and also current registers have length of 4, i.e. 32 bits, not 16. Since I have unselected "16bit register" option, I see proper voltage value.

  2. Total energy

    Open

    Christoph Moser

    In this module, there are 3 outputs for total energy: - Total active energy (kWh), - Total Energy IN, - Total Energy OUT Which of these is the actual meter reading?

    The manual of the Orno 517 doesn*t show Total Energy IN and OUT as output on the display. It only has Total active energy. https://files.orno.pl/manuals/OR-WE-513,516,517_manual_EN.pdf

    1 reply

    1. metaebene smart solutionsCreator

      "Total active energy" is in kWh "Total Energy IN" and "Total Energy OUT" is kW

Report this entry

Report abuse

You have to be logged in to report an entry. Log in