Template
ONOKOM AIR TN-1-MB-B
Content languageEnglish
Description
This template allows you to connect Tion 4S breezer that supported by the ONOKOM TN-1-MB-B gateway to the Loxone system via Modbus RTU.
Inputs and outputs · 28
| Name | Type | Unit |
|---|---|---|
| Breezer status | Modbus | |
| Screen light | Modbus | |
| Air heating | Modbus | |
| Outdoor air supply | Modbus | |
| Breezer is on the line | Modbus | |
| Mode | Modbus | <v.1> |
| Air temperature at the breezer outlet | Modbus | <v.1> |
| Breezer inlet air temperature | Modbus | <v.1> |
| Fan speed | Modbus | <v.1> |
| Control board temperature | Modbus | <v.1> |
| Power board temperature | Modbus | <v.1> |
| Days to filter replace | Modbus | <v.1> |
| Set days to next filter replace | Modbus | <v.1> |
| Filter needs to be replaced | Modbus | |
| Target temperature | Modbus | <v.1> |
| Beeper | Modbus | |
| Breezer status | Modbus | |
| Screen light | Modbus | |
| Air heating | Modbus | |
| Outdoor air supply | Modbus | |
| Mode | Modbus | <v.1> |
| Target temperature | Modbus | <v.1> |
| Fan speed | Modbus | <v.1> |
| Set days to next filter replace | Modbus | <v.1> |
| Reset filter counter | Modbus | |
| Baud rate | Modbus | <v.1> |
| Modbus address | Modbus | <v.1> |
| Beeper | Modbus |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in