Template
ONOKOM AIR TCL-1-MB-B
Content languageEnglish
Description
This template allows you to connect any TCL air conditioners supported by the ONOKOM TCL-1-MB-B gateway to the Loxone system via Modbus RTU.
Inputs and outputs · 41
| Name | Type | Unit |
|---|---|---|
| Indoor air temperature | Modbus | <v.1> |
| Outdoor air temperature | Modbus | <v.1> |
| AC connected (Status) | Modbus | |
| Screen light (Status) | Modbus | |
| Heating 8 deg (Status) | Modbus | |
| Beeper (Status) | Modbus | |
| Gentle wind (Status) | Modbus | |
| Mold protection (Status) | Modbus | |
| Ionization (Status) | Modbus | |
| Self cleaning (Status) | Modbus | |
| Sleep mode (Status) | Modbus | |
| Quiet mode (Status) | Modbus | |
| Turbo mode (Status) | Modbus | |
| Eco mode (Status) | Modbus | |
| Vertical vanes (Status) | Modbus | <v.1> |
| Outdoor heat exchanger temperature (Status) | Modbus | <v.1> |
| Indoor heat exchanger temperature (Status) | Modbus | <v.1> |
| Current fan speed (Status) | Modbus | <v.1> |
| Error count | Modbus | <v> |
| Last error code | Modbus | <v> |
| Error count | Modbus | |
| Horizontal vanes | Modbus | <v.1> |
| Active (Control) | Modbus | |
| Loxone modes (Control) | Modbus | <v.1> |
| Smart fan speed | Modbus | <v.1> |
| Screen light (Control) | Modbus | |
| Target temperature | Modbus | <v.1> |
| Vanes swing | Modbus | <v.1> |
| Ionization (Control) | Modbus | |
| Sleep mode (Control) | Modbus | |
| Self cleaning (Control) | Modbus | |
| Quiet mode (Control) | Modbus | |
| Beeper (Control) | Modbus | |
| Eco mode (Control) | Modbus | |
| Turbo mode (Control) | Modbus | |
| Mold protection (Control) | Modbus | |
| Heating 8 deg (Control) | Modbus | |
| Gentle wind (Control) | Modbus | |
| Modbus address (Service) | Modbus | <v.1> |
| Vertical vanes (Control) | Modbus | <v.1> |
| Horizontal vanes | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in