Skip to content
Library
Image of OCHSNER OTS Heat Pump
Template

OCHSNER OTS Heat Pump

by Ochsner Wärmepumpen GmbHNo rating yet708 downloads

Content languageEnglish

Download · v1.0.0Add to favourites

Updated Jul 27, 2022

Download · v1.0.0

Description

To integrate the OCHSNER heat pump via Modbus TCP the following requirements must be fulfilled:

- OTS Controller Software-Version >= V03.00.000 - APP-Version (Content of the Touch-Display and mobile APP) >= V03.00.000 - Android-Version of the APP on Touch-Display and Smartphone: >= V2.22.6 - iOs-Version of the APP >= V3.3.3

Inputs and outputs · 55

NameTypeUnit
Room temperature heating circuit 1Modbus°C
Room temperature heating circuit 2Modbus°C
Relative humidity heating circuit 1Modbus%
Relative humidity heating circuit 2Modbus%
Heat pump operating statusModbus<v>
Target operating mode: plantModbus<v>
Target heating_cooling temperatureModbus°C
System operating statusModbus<v>
Auxiliary heater operating statusModbus<v.1>
Target operating mode: DHWModbus<v>
Target DHW temperatureModbus°C
Switch-ON differential: DHWModbusK
Room temperature heating circuit 3Modbus°C
Room temperature heating circuit 4Modbus°C
Relative humidity heating circuit 3Modbus%
Relative humidity heating circuit 4Modbus%
Heat pump flow temperatureModbus°C
Heat pump return temperatureModbus°C
Flow rate, heat sink systemModbusm³/h
Buffer temperature topModbus°C
Flow temperature auxiliary heaterModbus°C
System pressure, heat sink systemModbusbar(g)
Evaporator intake air temperatureModbus°C
Evaporator discharge air temperatureModbus°C
Outdoor temperatureModbus°C
Compressor hours of operationModbush
Switching cycles, compressorModbus<v>
Hours of operation, auxiliary heaterModbush
Switching cycles, auxiliary heaterModbus<v>
Heat pump heating energyModbuskWh
Heat pump cooling energyModbuskWh
Heat pump DHW energyModbuskWh
Heat pump defrosting energyModbuskWh
Heat pump power demand heatingModbuskWh
Heat pump power demand coolingModbuskWh
Heat pump power demand DHWModbuskWh
Heat pump power demand defrostingModbuskWh
Auxiliary heater heating energyModbuskWh
Auxiliary heater DHW energyModbuskWh
Auxiliary heater defrosting energyModbuskWh
DHW temperatureModbus°C
Buffer temperature bottomModbus°C
Target operating mode: plantModbus<v>
Room temperature heating circuit 1Modbus°C
Room temperature heating circuit 2Modbus°C
Relative humidity heating circuit 1Modbus%
Relative humidity heating circuit 2Modbus%
Target heating_cooling temperatureModbus°C
Target operating mode: DHWModbus<v>
Target DHW temperatureModbus°C
Switch-ON differential: DHWModbusK
Room temperature heating circuit 3Modbus°C
Room temperature heating circuit 4Modbus°C
Relative humidity heating circuit 3Modbus%
Relative humidity heating circuit 4Modbus%

FAQ

No questions have been answered yet.

Ratings and comments

No ratings or comments yet.

Questions and answers

  1. Einbindung

    Open

    Andreas Schuch

    Hallo, dank Ihrer Vorlage hat die Einbindung toll geklappt DANKE.

    Nur ne kleinigkeit, Die momentane Leistungsaufnahme, kann man die auch auslesen?

    In der App von Ochsner ist das möglich.

    Danke im vorraus LG Andreas

    No replies

  2. Mapping ungenau

    Open

    Michael Mittermair

    Manche Wert werden nur in Ganzzahl ohen Komma geliefert.

    Zum Beispiel die Innentemperatur (Raumtemperatur Heizkreis 1). Hier wird zum Beispiel 22 geliefert, die App selbst zeigt jedoch 22,4 °C an. Ebenso verhält es sich mit der "Warmwassertemperatur". Diese wird auch nur in der Einheit 1 (also ohne Komma) geliefert.

    Wäre toll, wenn diese Werte auch mit 0.1 Nachkommastellen ausgespielt werden.

    Danke

    No replies

Report this entry

Report abuse

You have to be logged in to report an entry. Log in