Nous Wifi Socket A1T Smart Tasmota
Content languageEnglish
Description
This smart socket which is connected to Wifi works with Tasmota, so it can be remote controlled via "virtual inputs and outputs" in Loxone.
Web Interface: http://DeviceIP/? Web Interface of the smart socket, can be used for setup and firmware updates Power On: http://DeviceIP/cm?cmnd=Power%20On Power Off: http://DeviceIP/cm?cmnd=Power%20Off Sensor Data: http://DeviceIP/cm?cmnd=Status%208
When you are using the Power Measurements you should calibrate the unit like it is described in the Manual
Manual from Nous Nous Wifi Socket
Inputs and outputs · 6
| Name | Type | Command | Unit |
|---|---|---|---|
| Nous Current | VirtualInHttp | "Current":\v | <v.3> |
| Nous Factor | VirtualInHttp | "Factor":\v | <v.1> |
| Nous Power Reactive | VirtualInHttp | "ReactivePower":\v | <v.1> |
| Nous Power Apparent | VirtualInHttp | "ApparentPower":\v | <v.1> |
| Nous Voltage | VirtualInHttp | "Voltage":\v | <v.1> |
| Nous Power | VirtualInHttp | "Power":\v | <v.1> |
FAQ
No questions have been answered yet.
Questions and answers
just information
OpenHello,
thank you for the template and your time to create it. I have downloaded it and modified it. You can create rule where you set POST method for switch on and of and have only one virtual output. Hope this will help :)
Michal
2 replies
I'm very interested to learn how you did it? Could you share it in one way or another?
Thanks in advance! Kind regards Joris
Joris the virtual output has "Action at ON" and in the same menu there is also "Action ot OFF" so only one virtual output is needed.
Log in to rate, comment or ask a question. Log in
Ratings and comments
Michal Semler
Rated 4 of 5★★★★☆
There can be only one virtual output created where man create POST method for ON and OFF.
Log in to rate, comment or ask a question. Log in