Template
NORDline WWBA
Content languageEnglish
Description
Cooling/ Heat pumps - Mode control (cooling, heating, FCU heating, etc.) - Outlet water temperature control - information of temperature sensors, fan, compressor, bivalence, etc. - Pump errors complete over-cut control - integration via MODBUS RTU 485
Inputs and outputs · 20
| Name | Type | Unit |
|---|---|---|
| Mode | Modbus | <v.1> |
| Output temperature | Modbus | °C |
| Control mark | Modbus | <v.1> |
| Status output 1 | Modbus | <v.1> |
| control mark 2 | Modbus | <v.1> |
| Error 1 | Modbus | <v.1> |
| Error 4 | Modbus | <v.1> |
| Error 5 | Modbus | <v.1> |
| Error 2 | Modbus | <v.1> |
| DHW tank temperature | Modbus | °C |
| UFA tank temperature_ | Modbus | °C |
| Water pump mode | Modbus | <v> |
| Evaporator coil temperature | Modbus | °C |
| Reverse temperature | Modbus | °C |
| Temperature of discharge gas | Modbus | °C |
| FCU heating temp set point | Modbus | °C |
| Mode | Modbus | <v.1> |
| Outlet temperature of floor heating | Modbus | <v.1> |
| Water pump mode | Modbus | <v.1> |
| Outlet temperature FCU | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in