Template
my-PV AC ELWA 2
Content languageEnglish
Description
Use PV Surplus Power to heat up your Hotwater Boiler.
For the AC ELWA 2 to be controlled by Loxone via Modbus TCP, Modbus TCP must be set as the "control type" in the control settings of the AC ELWA E, and the "control timeout" must be set to 60 seconds. This settings can be made via the Display, more Details in the operation manuell.
Inputs and outputs · 11
| Name | Type | Unit |
|---|---|---|
| Read Target Temperatur | Modbus | °C |
| Read Temperatur T1 | Modbus | °C |
| Read Power | Modbus | W |
| Read Temperatur T2 | Modbus | °C |
| Read Device State | Modbus | <v> |
| Read Operation Mode | Modbus | <v> |
| Set Power | Modbus | W |
| Set Target Temperature | Modbus | °C |
| Set Power Timeout | Modbus | sec |
| Set Device State | Modbus | <v> |
| Set Operation Mode | Modbus | <v> |
FAQ
No questions have been answered yet.
Questions and answers
Set Power
OpenIch habe ein Problem mit dem - Set Power. Ich bekomme immer diese Fehlermeldung. Was kann das sein?
Illegal IO Address (Exception-Code 02)
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in