Template
KSB Calio Circulation pump
Content languageEnglish
Description
For detailed information on mobus registers see Table 26 on page 54 in Inst_Oper_Manual
Output:
- Operation mode - Setpoint speed
Input:
- Calc flow - Calc Head - Operation hours - Energy meter - Error value 1 - Error value 2 - Total flow - Operational status - Pump status - Pump power - Setpoint speed - Temp ambient - Temp motor - Temp pfc - Temp PSU - Temp Fluid
Inputs and outputs · 20
| Name | Type | Unit |
|---|---|---|
| Speed | Modbus | rpm |
| Error1 | Modbus | <v> |
| Error2 | Modbus | <v> |
| Calc Head | Modbus | m |
| Calc Flow | Modbus | l/t |
| Pmp Status | Modbus | <v> |
| Operating Hours | Modbus | t |
| Pmp power | Modbus | W |
| Temp PSU | Modbus | °C |
| Temp motor | Modbus | °C |
| Temp Ambient | Modbus | °C |
| Temp PFC | Modbus | °C |
| Temp Fluid | Modbus | °C |
| Energy meter | Modbus | kWh |
| Total flow | Modbus | m3 |
| Operational status | Modbus | <v> |
| Mode-read | Modbus | <v> |
| Setpoint speed read | Modbus | % |
| Mode-write | Modbus | <v> |
| Setpoint speed | Modbus | % |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in