Template
Kostal Modbus-TCP and Battery
Content languageEnglish
Description
Read values of your Kostal device via Modbus TCP.
Inputs and outputs · 12
| Name | Type | Unit |
|---|---|---|
| Yield Total (Ep) | Modbus | kWh |
| Total AC Active Power (Pp) | Modbus | kW |
| Total Home Consumption Battery | Modbus | kWh |
| Total Home Consumption Grid (Ev) | Modbus | kWh |
| Total Home Consumption PV | Modbus | kWh |
| Total Home Consumption | Modbus | kWh |
| Total active Power (Pv), (Powermeter) | Modbus | kW |
| Actual State of Charge (Ss) | Modbus | % |
| Actual battery charge_discharge power (Ps) | Modbus | kW |
| Yield Yearly | Modbus | kWh |
| Yield Daily | Modbus | kWh |
| Yield Monthly | Modbus | kWh |
FAQ
No questions have been answered yet.
Questions and answers
Funtion bei Kostal Piko 20?
OpenFunktioniert dies auch bei einem Kostal Piko 20? bringe es nicht zum laufen
1 reply
Unfortunately, I don't have a Modbus data point list to verify if the template is correct. I have contacted Kostal regarding the Modbus data point list for the Piko 20. It's likely that the addresses are different for the Piko. You could try using the "Kostal Piko MP Plus HTTP" template. Has anyone successfully integrated a Piko 20 using Modbus?
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in