iQntrol dosing system DOS-NET
Content languageEnglish
Description
iQntrol DOS-NET is a compact dosing system for water treatment that directly measures the redox potential of the pool water and thus doses the minimum amount of chemical additives required. The system monitors the set pH and redox value of the pool water and automatically adjusts the dosing to the changing ambient conditions. The touchscreen display allows full control over the measurement and regulation of the water values in the pool.
Interfaces RS485
Functions Parameters can be transferred to the Loxone via RS485, writing is not possible for safety reasons The following values are transferred from the DOS-NET to Loxone
- ph actual value - ph target value - ORP/REDOX actual value - ORP/REDOX target value - Water temperature - Error code
RS485 settings
- Baud rate - 57600 bit/s - Number of data bits - 8 - Stop bits - 1 - Parity - None
Peraqua offers a complete sample program for the entire pool including integration: Ocean® filter pump, Aquastar Air backwash valve, level control either with float switch or pressure sensor, water treatment either liquid chlorine or salt electrolysis. The sample programming or the pump can be requested at [email protected]
Inputs and outputs · 8
| Name | Type | Command | Unit |
|---|---|---|---|
| 03-04 pH | Comm | \s2\2\1 | <v.2> |
| 17 pH required | Comm | \s16\1 | <v.1> |
| 05-06 CL or RX | Comm | \s4\2\1 | mV |
| 18 CL or Rx required | Comm | \s17\1 | mV |
| 09-10 temperature | Comm | \s8\2\1 | <v.1> |
| 11 error1 | Comm | \s10\1 | <v> |
| 24 error2 | Comm | \s23\1 | <v> |
| 02 unit type | Comm | \s1\1 | <v.2> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in