Template
Innowater SMC Salt Chlorinator
Content languageEnglish
Description
Control your SMC chlorinator and other elements of your swimming pool with your mobile phone thanks to the Loxone SMC Modbus Interface. The Loxone SMC Modus Interface allows the chlorinator to be totally controlled by an external device. The working parameters will be available in the internet and can be visualised and modified with your mobile phone, a web browser or a PC / Mac application. An example of a Loxone project, which controls a few parameters, is provided. The project has been programmed for a MiniserGo and a ModbusAir but it can easily be transposed to other configurations. A list of the Modbus registers of the interface is provided.
Inputs and outputs · 23
| Name | Type | Unit |
|---|---|---|
| pH Set Point | Modbus | pH |
| pH | Modbus | pH |
| pH dosing | Modbus | % |
| pH command | Modbus | % |
| Current production | Modbus | % |
| Cell state | Modbus | <v> |
| Water sensor | Modbus | <v> |
| Volts | Modbus | voltios |
| Amps | Modbus | amperios |
| ON / OFF | Modbus | <v> |
| pH ON / OFF | Modbus | <v> |
| Delay | Modbus | <v> |
| RX ON / OFF | Modbus | <v> |
| Manual production | Modbus | <v> |
| RX | Modbus | <v> |
| RX Set Point | Modbus | <v> |
| RX dosing | Modbus | <v> |
| ON / OFF | Modbus | <v> |
| pH ON / OFF | Modbus | <v> |
| Production | Modbus | <v> |
| pH Set Point | Modbus | <v.2> |
| RX ON / OFF | Modbus | <v> |
| RX Set Point | Modbus | <v> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in