inChaNet Universal 2.0 DIN rail charging station
Content languageEnglish
Description
Here you will find information about the charging station, which is placed on a supporting DIN rail and contains a complete solution for the needs of users. It is a Universal EVSE 2.0 station and is unique on the market due to its very small dimensions and placement in the cabinet as well as Loxone HW control elements.
The owner and user of this charging station simply chooses the location of the Type 2 socket or the charging cable with a connector in a minimalist style.
inChaNet charging stations communicate via Modbus TCP. It is connected to the local network in which the Loxone control is being considered using an Ethernet cable (RJ45) or WiFi. The table with Modbus registers can be found here.
Supported stations are: Universal 2.0 DIN, Cubish Tower Smart, Cubish Portabox Smart, Cubish wallbox L Smart and XL Smart.
Inputs and outputs · 56
| Name | Type | Unit |
|---|---|---|
| 0 EVSE ID | Modbus | <v> |
| 2 EVSE Charge Enabled | Modbus | <v> |
| 3 EVSE Allowed Charge Current | Modbus | A |
| 4 EVSE Charge Mode - 1Phase/3Phase | Modbus | |
| 5 EVSE Third Relay (socket lock) | Modbus | |
| 6 External Relay (optional) | Modbus | |
| 10 EVSE Default Allowed Charge Current [A] | Modbus | A |
| 11 EVSE Default Charge Mode - 1Phase/3Phase | Modbus | <v> |
| 12 EVSE Type | Modbus | <v> |
| 13 Grid Type | Modbus | <v> |
| 14 Source Wh measurement | Modbus | <v> |
| 15 Comm Type with | Modbus | <v> |
| 16 External Relay Conf | Modbus | <v> |
| 100 EVSE L1 Voltage | Modbus | V |
| 102 EVSE L2 Voltage | Modbus | V |
| 104 EVSE L3 Voltage | Modbus | V |
| 106 EVSE L1 Current | Modbus | A |
| 108 EVSE L2 Current | Modbus | A |
| 110 EVSE L3 Current | Modbus | A |
| 112 EVSE L1 Power factor | Modbus | <v.2> |
| 114 EVSE L2 Power factor | Modbus | <v.2> |
| 116 EVSE L3 Power factor | Modbus | <v.2> |
| 134 EVSE Wh charged all time (total counter) | Modbus | Wh |
| 118 EVSE L1 Frequency | Modbus | Hz |
| 120 EVSE L2 Frequency | Modbus | Hz |
| 122 EVSE L3 Frequency | Modbus | Hz |
| 126 EVSE L2 Power | Modbus | W |
| 128 EVSE L3 Power | Modbus | W |
| 130 EVSE Total Power | Modbus | Wh |
| 132 EVSE Wh charged in this session (charge session) | Modbus | Wh |
| 124 EVSE L1 Power | Modbus | W |
| 136 EVSE Temperature | Modbus | °C |
| 138 EVSE EV State | Modbus | <v.1> |
| 139 EVSE Charging State (theoretical) | Modbus | <v.1> |
| 144 EVSE Emergency STOP button | Modbus | <v.1> |
| 140 EVSE Actual Charging State | Modbus | <v.1> |
| 141 EVSE Warnings | Modbus | <v.1> |
| 142 EVSE Seriour Errors | Modbus | <v.1> |
| 143 EVSE Socket's lock state | Modbus | <v.1> |
| 145 EVSE PP Pin State | Modbus | <v.1> |
| 146 EVSE CP Pin PWM Width | Modbus | <v.1> |
| 137 EVSE External Temperature | Modbus | <v.1> |
| 2 EVSE Charge Enabled | Modbus | <v> |
| 3 EVSE Allowed Charge Current | Modbus | <v.1> |
| 52 EVSE Protocol Version | Modbus | <v.1> |
| 4 EVSE Charge Mode - 1Phase/3Phase | Modbus | |
| 5 EVSE Third Relay (socket lock) | Modbus | |
| 6 EVSE External Relay (optional) | Modbus | |
| 10 EVSE Default Allowed Charge Current [A] | Modbus | <v.1> |
| 11 EVSE Default Charge Mode - 1Phase/3Phase | Modbus | <v.1> |
| 12 EVSE Type | Modbus | <v.1> |
| 13 Grid Type | Modbus | <v.1> |
| 14 Source Wh measurement | Modbus | <v.1> |
| 15 Comm Type with | Modbus | <v.1> |
| 16 External Relay Conf | Modbus | <v.1> |
| 50 Set Wh-Total Counter | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in