Hytek Pool Hygiene

The Hytek control unit is a operating system for pH, REDOX & CHLOR There are two different ways how to connect Hytek with Loxone:

- Hytek BT Modbusmodule with Loxone Modbus Extension - Hytek BT Modbusmodule with a Loxone Modbus Air.

Depending on variation of your project you can choose between Miniserver, Miniserver Go or Miniserver Compact

The choice of paring Hytek Systems with Loxone offers the possibility of:

- Proactive reporting management: Be informed via push notifications, E-Mails, system notifications or a call when, for example, the Chlor tank is empty. - Analysis management thanks to statistics, logger and tracker - Free of Charge Visualization of status values, pH value, redox, chlorine and flow rate - Free of Charge Programming Software Loxone Config allows individual logics, diagnostic tools and free updates. - Create individual schematics of your pool or just of the control unit for a quick overview - Increased security through leakage detection or activation of IP cameras in the plant room. - The Hytek control unit can be perfectly integrated into an overall pool system controlled by Loxone and allows interaction with the Loxone Energy management system, the filter system or the pool heatpump.

Structure:

UseCase:

Activation of Modbus on Hytec, Hytec Helpcenter & Loxone Config: Please take a look in the attached downloadarea File "Loxone Integrationsanleitung Hytek Deutsch".

If you need help to configure your Hytec control unit please contact: Pools (hytek.at) .