Template
HomeWizard Wi-Fi kWh meter 1-phase
Content languageEnglish
Description
With this template you will be able to read the HomeWizard 1-phase Wifi Meter. Just follow the HomeWizard installation instructions and add this template to your Loxone project.
The template has several datapoints to read
This is an example to use the template
The Local API should be enabled on the watermeter; In the HomeWizard Energy app: Go to Settings > Meters > ''Your meter'', and enable Local API.
Product information can be found: Here. Advanced API documentation: Here.
Inputs and outputs · 12
| Name | Type | Command | Unit |
|---|---|---|---|
| Wi-Fi Strength | VirtualInHttp | \i"wifi_strength":\i\v | <v.1> |
| Total Power Import | VirtualInHttp | \i"total_power_import_kwh":\i\v | <v.1> |
| Total Power Export | VirtualInHttp | \i"total_power_export_kwh":\i\v | <v.1> |
| Active Power | VirtualInHttp | \i"active_power_w":\i\v | <v.1> |
| Active Voltage | VirtualInHttp | \i"active_voltage_v":\i\v | <v.1> |
| Active Current | VirtualInHttp | \i"active_current_a":\i\v | <v.1> |
| Active Apparent Current | VirtualInHttp | \i"active_apparent_current_a":\i\v | <v.1> |
| Active Reactive Current | VirtualInHttp | \i"active_reactive_current_a":\i\v | <v.1> |
| Active Apparent Power | VirtualInHttp | \i"active_apparent_power_va":\i\v | <v.1> |
| Active Reactive Power | VirtualInHttp | \i"active_reactive_power_var":\i\v | <v.1> |
| Active Power Factor | VirtualInHttp | \i"active_power_factor":\i\v | <v.1> |
| Active Frequency Hz | VirtualInHttp | \i"active_frequency_hz":\i\v | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in