HomeWizard P1 meter - Extended
Content languageEnglish
Description
This is an extended version of the HomeWizard P1 plugin created by Cloudscratcher BVBA. With this template you will be able to read all the HomeWizard P1 Meter. Just follow the HomeWizard installation instructions and add this template to your Loxone project.
The template has several datapoints to read
This is an example to use the template
The Local API should be enabled on the watermeter; In the HomeWizard Energy app: Go to Settings > Meters > ''Your meter'', and enable Local API.
Product information can be found: Here. Advanced API documentation: Here.
Inputs and outputs · 18
| Name | Type | Command | Unit |
|---|---|---|---|
| Smartmeter Version | VirtualInHttp | \i"smr_version":\i\v | <v.1> |
| Wi-Fi Strength | VirtualInHttp | \i"wifi_strength":\i\v | <v.1> |
| Power Import Counter 1 | VirtualInHttp | \i"total_power_import_t1_kwh":\i\v | <v.1> |
| Power Import Counter 2 | VirtualInHttp | \i"total_power_import_t2_kwh":\i\v | <v.1> |
| Power Export Counter 1 | VirtualInHttp | \i"total_power_export_t1_kwh":\i\v | <v.1> |
| Power Export Counter 2 | VirtualInHttp | \i"total_power_export_t2_kwh":\i\v | <v.1> |
| Total Active Power | VirtualInHttp | \i"active_power_w":\i\v | <v.1> |
| Active Power Phase 1 | VirtualInHttp | \i"active_power_l1_w":\i\v | <v.1> |
| Active Power Fase 2 | VirtualInHttp | \i"active_power_l2_w":\i\v | <v.1> |
| Active Power Phase 3 | VirtualInHttp | \i"active_power_l3_w":\i\v | <v.1> |
| Gas | VirtualInHttp | \i"total_gas_m3":\i\v | <v.1> |
| Gas Timestamp | VirtualInHttp | \i"gas_timestamp":\i\v | <v.1> |
| Active Voltage Phase 1 | VirtualInHttp | \i"active_voltage_l1_v":\i\v | <v.1> |
| Active Voltage Fase 2 | VirtualInHttp | \i"active_voltage_l2_v":\i\v | <v.1> |
| Active Voltage Phase 3 | VirtualInHttp | \i"active_voltage_l3_v":\i\v | <v.1> |
| Active Ampere Phase 1 | VirtualInHttp | \i"active_current_l1_a":\i\v | <v.1> |
| Active Ampere Phase 2 | VirtualInHttp | \i"active_current_l2_a":\i\v | <v.1> |
| Active Ampere Phase 3 | VirtualInHttp | \i"active_current_l3_a":\i\v | <v.1> |
FAQ
No questions have been answered yet.
Questions and answers
Is it also possible to add the datapoints for water usage?
OpenIn addition to power and gas, I can also read water usage with my P1 Homewizard (app). Is it possible to read this datapoints in Loxone?
1 reply
For water usage, you need to purchase the HomeWizard Watermeter and use our template: https://library.loxone.com/detail/homewizard-watermeter-1301/overview Make sure you set the IP address to the one assigned to the HomeWizard Watermeter, not the P1 meter.
Is it also possible to add the datapoints for water usage?
OpenIn addition to power and gas, I can also read water usage with my P1 Homewizard (app). Is it possible to read this datapoints in Loxone?
1 reply
For water usage, you need to purchase the HomeWizard Watermeter and use our template: https://library.loxone.com/detail/homewizard-watermeter-1301/overview Make sure you set the IP address to the one assigned to the HomeWizard Watermeter, not the P1 meter.
Commando voor de digitale watermeter P1 Homewizard
OpenKan iemand het commando opgeven voor de uitlezing van de digitale waterteller? Ik zie dat zowel gas of water hetzelfde gebruiken"value".
1 reply
Voor waterverbruik moet je de HomeWizard Watermeter aanschaffen en onze template gebruiken: https://library.loxone.com/detail/homewizard-watermeter-1301/overview
Zorg ervoor dat je het IP-adres instelt van de HomeWizard Watermeter zelf, en niet dat van de P1-meter.
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in