Template
FSP-Solar
Content languageEnglish
Description
Interface of an FSP-Solar-HybridInverter / Voltronic-InfifiSolar device via Modbus-RTU and via the P17 Modbus card
Important notice! The manufacturer does not recommend sending multiple control commands to the inverter, as the values will then be immediately stored persistently in the EEPROM, which can cause the memory to become damaged. Read access is not a problem but should be limited to a maximum of 5 seconds.
Inputs and outputs · 25
| Name | Type | Unit |
|---|---|---|
| 892 1 Inner temperature Read Only | Modbus | 10 |
| 984 2 AC output total power Read Only | Modbus | 10 |
| 387 2 Solar input power 1W Read Only | Modbus | 10 |
| 389 2 Solar input power 2 W Read Only | Modbus | 10 |
| 1253 2 The max power limit to feed to grid ,32 bit,the upper 16 bits are 0000 | Modbus | 10 |
| 208 working mode | Modbus | 10 |
| 211 AC input active power R | Modbus | 10 |
| 217 AC output active power R | Modbus | 10 |
| 234 Solar input voltage 1 | Modbus | 10 |
| 235 Solar input voltage 2 | Modbus | 10 |
| 257 AC input active power S | Modbus | 10 |
| 259 AC input active power T | Modbus | 10 |
| 377 AC input total active power | Modbus | 10 |
| 245 AC output total active power | Modbus | 10 |
| 188 Battery voltage | Modbus | 10 |
| 226 Battery capacity | Modbus | 10 |
| 231 Battery current | Modbus | 10 |
| 696 Solar input current 1 | Modbus | 10 |
| 698 Solar input current 2 | Modbus | 10 |
| 230 +: charge, -: discharge(Battery current) | Modbus | 10 |
| 1196 Battery power | Modbus | 10 |
| 614 AC input current R | Modbus | 10 |
| 616 AC input current S | Modbus | 10 |
| 618 AC input current T | Modbus | 10 |
| 1253 2 The max power limit to feed to grid ,32 bit,the upper 16 bits are 0000 | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in