Flush-mounting microprocessor sensors for ambient temperature and humidity measurement with display baud rate 9600

MB-THL-9K6 sensors are active sensors with microprocessor to measure the temperature and relative humidity provided for installation with coordinated design with the main flush-mounted civil series (BTicino, Vimar, Gewiss, ABB etc.) featuring high readability LED display to view and set parameters. Using two touch buttons through the Modbus RTU (RS485) it is possible to set the temperature set point and the system operating mode (ON, OFF, Auto). The sensors have the following characteristics:

- the resolution of the temperature measurement is 0.1°C, the typical accuracy is +/- 0.4°C; - the resolution of the humidity measurement is 0.1% RH, the typical accuracy is +/- 3%RH; - the communication parameters are 9600, N, 8, 1; - the configurable slave address goes from 1 to 255.

Inside the 503 box they occupy 2 positions.

For more parameters see the datasheet.