Elli ID.Charger 2

Preconditions and dependencies:

- for the installation of the charger be aware of the installation manual (see additional downloads)

- the wallbox firmware version ist at least R12_R04.004.045.303

- inside the web configuration of the wallbox the "Modbus-Server" need to be activated

- decouple connected Modbus Meter and deactivate "Energy Management System"

- deactivate all smart charging function via the Elli or Smart Charging App (Forcast-based charging, PV-surplus charging and Market price optimized charging)

Configuration in Loxone:

- here is an example of the minimal configuration in Loxone

- the formula should look like this: I1*1000/(400*SQRT 3) - the Status vehicle connected should configured as

Special information:

- based on the charger configuration the template can be used for 1-phase charging as well for 3-phase charging - 1-phase: 6 - 16 A --> approx. 1.4 kW - 7.4 kW - 3-phase: 6 - 16 A --> approx. 4.2 kW - 11 kW

- the are two ways to configure the phase settings of the wallbox - via reset to factory default --> select 1-phase in the onboarding wizard of the wallbox

- via overview or charging management --> charging settings at the webconfig of the charger --> select 1-phase

Additional modbus register definitions you can find in the modbus_registerliste_v1.0 (see additional downloads).

If something is not working correct or questions come up please contact: [email protected]