Elgato Key Light

Control your Elgato Key Lights.

Tested with the Elgato Key Light Mini. However, it should also work with other Wi-Fi-enabled Key Lights from the Elgato family.

Installation Guide: Step 1: IP-Adress Set Up

- Open the "Control Center" app on your phone. - Tap the info icon on the lamp you want to control. - Scroll down to the "IP Address" field. - Add the IP address to the settings of the virtual output in the Loxone Config. (Example: http://192.168.1.100:9123)

Step 2: Control the light

- The "switch" command is controlled using 1 or 0 and turns the lamp on or off. - The "brightness" command controls the brightness. A value from 0 to 100 sets the lamp brightness from 0% to 100%. - The "temperature" command controls the light color temperature. A value of 143 corresponds to 2900K, and a value of 344 corresponds to 7000K.

API documentation