Carlo Gavazzi EM111
Content languageEnglish
Description
• Single phase energy meter • Class 1 (kWh) according to EN62053-21 • Class B (kWh) according to EN50470-3 • Accuracy ±0.5% RDG (current/voltage) • Direct current measurement up to 45AAC • Backlit LCD display with integrated touch key-pad • Energy readout on display: 7 digit • Variable readout on display: 4 digit • Energy measurement: kWh and kvarh (imported/ exported); kWh+ by 2 tariffs • System variables, kW, kvar, V, A, PF, Hz, kWdmd, kWdmd peak • Self power supply • Dimensions: 1-DIN module • Protection degree (front): IP51 • Pulse output (optional, by opto-mosfet) • RS485 Modbus port (optional) • M-bus port (optional) • Digital input (for tariff management
Read values of a single-phase Carlo Gavazzi EM111 Energy Meter.
Inputs and outputs · 11
| Name | Type | Unit |
|---|---|---|
| Voltage | Modbus | V |
| Current | Modbus | A |
| Power | Modbus | kW |
| Frequency | Modbus | Hz |
| Total power | Modbus | kWh |
| Reactive power | Modbus | VAr |
| Apparent power | Modbus | VA |
| Power factor | Modbus | <v.1> |
| Power tarif 1 | Modbus | kWh |
| Power tarif 2 | Modbus | kWh |
| Export power | Modbus | kWh |
FAQ
No questions have been answered yet.
Questions and answers
Trouble Getting this to work
OpenHi I'm not sure if im doing something wrong or if these needs any modification.
I'm connected to a brand new EM112 meter (which going by the document should use the same modbus register as the EM111. The parameters on both loxone and the meter are: address - 1 parity - none baud rate - 9600
1 reply
Hi Does it report a communication error? The stop bit settings in the modbus extension are the same with EM112?
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in