Template
Belimo VAV-Compact Modbus RTU
Content languageEnglish
Description
Provides a compact solution with a communications capability for pressure-independent VAV and CAV systems in the comfort zone.
Structure:
Inputs and outputs · 27
| Name | Type | Unit |
|---|---|---|
| Actuator Type | Modbus | <v> |
| Relative Position | Modbus | % |
| Absolute Position | Modbus | ° |
| Sensor 1 Value | Modbus | <v.1> |
| Setpoint Analog | Modbus | % |
| Series Number 1st Part | Modbus | <v> |
| Series Number 2nd Part | Modbus | <v> |
| Series Number 4th Part | Modbus | <v> |
| Firmware Version | Modbus | <v> |
| Malfunction and Service Information | Modbus | <v> |
| Relative volumetric flow | Modbus | % |
| Absolute volumetric flow in m3 per hour | Modbus | m3/h |
| Absolute volumetric flow in selected units | Modbus | m3/h |
| Nominal volumetric flow in m3 per hour | Modbus | m3/h |
| Nominal volumetric flow in selected unit | Modbus | m3/h |
| Control mode | Modbus | <v> |
| Setpoint | Modbus | % |
| Override Control | Modbus | <v> |
| Command | Modbus | <v> |
| Bus Termination | Modbus | <v> |
| Minimum | Modbus | % |
| Maximum | Modbus | % |
| Sensor 1 Type | Modbus | <v> |
| Bus Fail Position | Modbus | <v> |
| Timeout for Bus Watchdog in s | Modbus | s |
| Setpoint Source | Modbus | <v> |
| Unit selection flow | Modbus | <v> |
FAQ
No questions have been answered yet.
Questions and answers
QTY on a line
OpenHi, If you use this template with all the datapoints. How many Belimo VAV on one modbus line is recomended and how many maximum?
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
Henrik Håvardsholm
Rated 5 of 5★★★★★
Thanx!
Log in to rate, comment or ask a question. Log in