Template
AVA Smart Actuator
Content languageEnglish
Description
Modbus address, baud rate, parity, stop bits - can be adjusted on the device itself The output to the device is controlled from 0-1000 and in the correction values it is set to 0-10 ready to be connected to the Mixing Valve function block.
Note!: The A and B terminals are switched!
Inputs and outputs · 2
| Name | Type | Unit |
|---|---|---|
| Read Valve Position | Modbus | <v.1> |
| Change Valve Position | Modbus | % |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in