Asin Aqua Net - pool Chlorine and pH
Content languageEnglish
Description
The values are updated 1x per 10 seconds at speed 57600 bauds. Readings and reading error can be displayed in the Status function block.
System overview is also to be considered
Inputs and outputs · 6
| Name | Type | Command | Unit |
|---|---|---|---|
| pH | Comm | \s2\2\1 | <v.2> |
| pH requested | Comm | \s16\1 | <v.1> |
| Chlorine | Comm | \s4\2\1 | mg/l |
| Chlorine requested | Comm | \s17\1 | mg/l |
| Temperature | Comm | \s8\2\1 | <v.1> |
| Error code | Comm | \s10\1 | <v> |
FAQ
No questions have been answered yet.
Questions and answers
Asin Aqua Net
OpenHi, I'm not sure so I prefer to ask. Integration with Asin Aqua Net gives me only information about current temperature, pH, chlorine? Whether can I set something from Loxone App?
1 reply
Dear Piotr, correct. This version of Asin Aqua´s firmware does not support any writing as far as we were informed. Best regards Lukáš Matěna www.smarteon.cz
Connection Aseko to Loxone
OpenHi How do i make the connection betwen the Loxone and the Aseko Aqua Net? Do i use the Netzwork Connection?
Thanks for the Answer.
1 reply
Hi Sven, you need to use the RS485 Extension and use wired connection. Best regrads Lukáš from Smarteon systems www.smarteon.cz
Asin Aqua Salt VS
OpenDobrý den, je možno tuto šablonu použít i pro ASIN AQUA Salt VS?
Děkuji za odpověď
S pozdravem Daniel Stehlík
1 reply
Dobrý den, v době vydání bylo třeba HW, který byl jen v jednotce označené jako NET. Podporu pro RS485 komunikaci u jednotky Salt VS je třeba poptat u výrobce / dodavatele. S pozdravem Lukáš Matěna
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in