AMPERFIED Wallbox connect.home
Content languageEnglish
Description
The screenshot shows a simple example to control the AMPERFIED Wallbox connect.home with the Loxone Wallbox function block. Please note: This example only works with EVs with 3 Phase Onboard charger. The values in the status function block:
The formula in the formula function block: (I2*1000/(400*SQRT 3))*I1
In order to use solar surplus for charging the input “All – Limit [kW]” in the Wallbox function block has to be used. It is important that the charging current is at least 6A. Below 6A, the Wallbox doesn´t start the charging process. Please note: Some EV even require a minimum charging current at least 10A. Examples: - Mercedes EQA - Mercedes EQB - Mercedes EQC - Renault Twingo - Renault Zoe - Smart forfour - Smart fortwo - Peugeot 208 - Opel Corsa-e
Inputs and outputs · 24
| Name | Type | Unit |
|---|---|---|
| 5 Charging State | Modbus | <v.1> |
| 6 L1 - Current RMS | Modbus | A |
| 14 Power (L1+L2+L3) | Modbus | kW |
| 12 Voltage L3 - N rms | Modbus | V |
| 11 Voltage L2 - N rms | Modbus | V |
| 10 Voltage L1 - N rms | Modbus | V |
| 8 L3 - Current RMS | Modbus | A |
| 7 L2 - Current RMS | Modbus | A |
| 257 Modbus-Master Watchdog Timeout | Modbus | s |
| 4 Modbus Register-Layouts Version | Modbus | <v.1> |
| 9 PCB-Temperatur | Modbus | °C |
| 13 Extern lock state | Modbus | <v.1> |
| 15 Energy since PowerOn (High byte) | Modbus | <v.1> |
| 16 Energy since PowerOn (Low byte) | Modbus | <v.1> |
| 17 Energy since Installation (High byte) | Modbus | <v.1> |
| 18 Energy since Installation (Low byte) | Modbus | W |
| 100 Hardware configuration maximal current | Modbus | <v.1> |
| 101 Hardware configuration minimal current | Modbus | <v.1> |
| 261 Maximal current command | Modbus | A |
| 262 Failsafe Current configuration | Modbus | A |
| 261 Maximal current command | Modbus | <v.1> |
| 257 ModBus-Master WatchDog Timeout | Modbus | <v.1> |
| 259 Remote lock | Modbus | <v.1> |
| 262 FailSafe Current configuration | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in