Template
Amit DM-OT2 Modbus to OpenTherm
Content languageEnglish
Description
This is a template for Amit DM-OT2 ARION/Modbus RTU to OpenTherm/plus device configured as Modbus. To configure device as Modbus device, remove jumper from the board and set switches to suit your needs to define device's address.
Inputs and outputs · 20
| Name | Type | Unit |
|---|---|---|
| Teplota TUV | Modbus | °C |
| Teplota topné vody TV1_ | Modbus | °C |
| Teplota topné vody TV2 | Modbus | °C |
| Teplota vratu | Modbus | °C |
| Venkovní teplota | Modbus | °C |
| Výkon topného zdroje | Modbus | % |
| Tlak | Modbus | bar |
| Průtok | Modbus | l/s |
| Teplota spalin 118 | Modbus | °C |
| ID | Modbus | <v.1> |
| Firmware | Modbus | <v.1> |
| BaudRate | Modbus | <v> |
| Parita | Modbus | <v> |
| Adresa | Modbus | <v> |
| Kód poslední chyby | Modbus | <v> |
| Stavový registr | Modbus | <v.1> |
| DM-OT2 200 | Modbus | <v.1> |
| DM-OT2 201 | Modbus | <v.1> |
| DM-OT2 203 | Modbus | <v.1> |
| DM-OT2 205 | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in