Alpha Innotec Heating & Cooling Split
Content languageEnglish
Description
Due to changes within the product series, this template will be revised in the near future. 21.02.24 - Ait Austria
---------- Deutsch ---------- Wärmepumpen erfüllen problemlos die Anforderungen der Energieeinsparverordnung und heizen sehr energieeffizient. Sie erzeugen aus einer Kilowattstunde Strom je nach Jahresarbeitszahl und Wärmequelle drei bis fünf Kilowattstunden Wärme. Wärmepumpen schützen aktiv das Klima, denn sie heizen mit Umweltwärme und auch der Stromanteil wird zunehmend erneuerbar. Wärmepumpen können nicht nur heizen, sondern im Sommer auch kühlen. Außerdem nehmen sie im Haus nicht viel Platz ein. Machen Sie sich unabhängig von Öl und Gas und erhöhen Sie den Autarkiegrad in Kombination mit einer Solar oder Photovoltaikanlage. Hinweis: Um die Modbus-Kommunikation nutzen zu können, benötigen Sie das Modbus Split-Modul und eine LOXONE Modbus Extension. ---------- English ---------- Heat pumps easily meet the requirements of the German Energy Saving Ordinance (Energieeinsparverordnung) and provide very energy-efficient heating. They generate three to five kilowatt hours of heat from one kilowatt hour of electricity, depending on the annual performance factor. Heat pumps actively protect the climate, because they heat with environmental heat and the share of electricity is also becoming increasingly renewable. Heat pumps can not only heat, but also cool in summer. In addition, they do not take up much space in the house. Make yourself independent of oil and gas and increase the degree of self-sufficiency in combination with a solar system. Notice: In order to beable to use the Modbus comminacation, you need this Modbus split module and a LOXONE Modbus Extension.
Inputs and outputs · 13
| Name | Type | Unit |
|---|---|---|
| HOT water temperature(BT7) | Modbus | <v.1> |
| Room tempreture(BT50) | Modbus | <v.1> |
| Alarm | Modbus | <v> |
| Supply tempreture(BT2) | Modbus | <v.1> |
| Return temperature (BT3) | Modbus | ° |
| Outdoor tempreture (BT1) | Modbus | ° |
| Brine in temperature (BT10) | Modbus | ° |
| Brine out temperature(BT11) | Modbus | ° |
| Allow Heating | Modbus | |
| Allow Cooling | Modbus | |
| HOT Water Mode | Modbus | <v.1> |
| Holiday | Modbus | <v.1> |
| Reset Alarm | Modbus |
FAQ
No questions have been answered yet.
Questions and answers
Keine Kommunikation nach Hydrauliktower Update
OpenSeit dem Update auf die aktuellste Version im HT kann Loxone keine Verbindung mehr zur WP aufbauen. Gibt es hier Lösungsansätze?
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in