Template
Acond modbus
Content languageEnglish
Description
Acond Modbus TCP/IP library for PRO and Grandis series
Inputs and outputs · 42
| Name | Type | Unit |
|---|---|---|
| T_set_indoor1 | Modbus | °C |
| T_act_indoor1 | Modbus | °C |
| T_set_indoor2 | Modbus | °C |
| T_act_indoor2 | Modbus | °C |
| T_set_TUV | Modbus | °C |
| T_act_TUV | Modbus | °C |
| TC_status | Modbus | <v.0> |
| T_set_water_back | Modbus | °C |
| T_act_water_back | Modbus | °C |
| T_act_air | Modbus | °C |
| T_act_solar | Modbus | °C |
| T_act_pool | Modbus | °C |
| T_set_pool | Modbus | °C |
| rezim_pan | Modbus | <v.0> |
| typ_reg_pan | Modbus | <v.0> |
| T_solanka | Modbus | °C |
| HeartBeat | Modbus | <v.0> |
| T_act_water_outlet | Modbus | °C |
| T_set_water_outlet | Modbus | °C |
| Comp_max | Modbus | RPM or W |
| err_number | Modbus | <v.0> |
| err_number_SECMono | Modbus | <v.0> |
| err_number_driver | Modbus | <v.0> |
| comp_actual | Modbus | RPM or W |
| actual PWM | Modbus | % |
| manual PWM | Modbus | <v.0> |
| T_set_indoor1 | Modbus | °C |
| T_act_indoor1 | Modbus | °C |
| T_set_indoor2 | Modbus | °C |
| T_act_indoor2 | Modbus | °C |
| T_set_TUV | Modbus | °C |
| TC_set | Modbus | <v.0> |
| TC_set_reg | Modbus | <v.0> |
| T_set_water_back | Modbus | °C |
| T_air | Modbus | °C |
| T_act_solar | Modbus | °C |
| T_act_pool | Modbus | °C |
| T_set_pool | Modbus | °C |
| T_set_water_cool | Modbus | °C |
| Comp_max | Modbus | RPM or W |
| PWM | Modbus | % |
| manual PWM | Modbus | <v.1> |
FAQ
No questions have been answered yet.
Questions and answers
Split air conditon
OpenHI, I have to implement in Loxone air condition AMW5-42 with 5 units ASAi-09. Can I use this Modbus communication protocol for communication with these units? Do I need it modbus unit in each inside unit or can I assembly just one communication at outside unit?
Thank you.
No replies
Log in to rate, comment or ask a question. Log in
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in