Template
02 InnoCharge Wallbox (OLD)
Content languageEnglish
Description
factory communication settings:
Protocol: Modbus RTU (HEX) Baudrate: 9600 Parität: none Stopbits: 1 Data Bit: 8
communication framework:
Protocol: Modbus RTU (HEX) -8 Bit Slave Adress(0x01) -FunctionCode (e.g. 0x03/0x10) -N x 8 Bit Data -> Register Adress(16 Bit); NumberofCoils (16 Bit, e.g. 0x09 forall Registers ifstartingwithAdress0x00); ActualData (e.g. 16 Bit integer) -16 Bit CyclicRedundancyCheck (CRC) formessageverification
Inputs and outputs · 15
| Name | Type | Unit |
|---|---|---|
| 0=EVSE status 1 Ready, 2 Connected, 3 Charging | Modbus | <v.1> |
| 1=Actual Modbus ID, default 1 | Modbus | <v.1> |
| 2=Installed Amps (Read from rotary switch) | Modbus | <v.1> |
| 3=Force unlock (Always 0) | Modbus | <v.1> |
| 4=Disable Charging-Station | Modbus | <v.1> |
| 5=Trottled A | Modbus | <v.1> |
| 6=New Modbus ID | Modbus | <v.1> |
| 7=Write new ID to EPROM | Modbus | <v.1> |
| 8=Reboot Unit | Modbus | <v.1> |
| 3=Force unlock | Modbus | <v.1> |
| 4=Disable Charging-Station | Modbus | <v.1> |
| 5=Set actual Amps, must be higher than 6A | Modbus | <v.1> |
| 6=Write new Modbus ID | Modbus | <v.1> |
| 7=Write parameter 6 to EPROM | Modbus | <v.1> |
| 8=Unit reboots | Modbus | <v.1> |
Ratings and comments
No ratings or comments yet.
Log in to rate, comment or ask a question. Log in